[Fri Apr  6 15:46:05 2012] Detection parameters:
  Position = (245.3, 211.6) = 8 10 27.55 -49 20 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.7 +/- 21.7
  Background counts = 123.7
  Rate = 0.002 +/- 0.0002

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 7.38'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Fri Apr  6 19:33:02 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.783
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 10.12"
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src75.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src75.csv
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src75_1.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src75.csv
[Fri Apr  6 21:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Fri Apr  6 21:14:28 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Fri Apr  6 21:15:05 2012] Source 122 is offset by 0.396300 and 5.693618 pixels which is larger than
2 X fitted extent = 1.243701 x 1.243701, not incorporating fit results
[Fri Apr  6 21:15:06 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 122 at 13.173208 pixels away
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:21:29 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sat Apr  7 01:21:29 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.783
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 10.12"
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src73.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src73.csv
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src73_1.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src73.csv
[Sat Apr  7 03:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Sat Apr  7 03:14:13 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Sat Apr  7 03:14:54 2012] Spatial fit model total counts = 855.559000, observed total counts = 853.000000
[Sat Apr  7 03:14:54 2012] Offset between fit and detection position for source 122 = 0.294429 pixels
[Sat Apr  7 03:14:54 2012] 867.768000 total counts/ 746.510000 bgd. counts: snr = 4.438054
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 0.294429 pixels
  Position = (245.2, 211.4) = 8 10 27.64 -49 20 19.6
  Extent = 6.7 (4.8-8.5)", rotation angle = 0
  Source counts = 121.3 +/- 29.5
  Background counts = 746.5
  Rate = 0.001 +/- 0.0003
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:26 2012] XMMSAS src. selection expression = ellipse(21279.748860, 18345.159800, 399.111011, 399.111011, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src122_src.reg
[Sun Apr  8 01:33:26 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (222, 188) - (268, 234)
[Sun Apr  8 01:33:26 2012] XMMSAS bgd. selection expression = annulus(21279.748860, 18345.159800, 665.185019, 1330.370038, X, Y) && !ellipse(21412.415600, 19715.291200, 366.935211, 366.935211, 0.000000, X, Y) && !ellipse(20413.310318, 16925.797913, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src122.gif
[Sun Apr  8 01:52:08 2012] Mean detx,y = (-6056.59, 3495.15) 
[Sun Apr  8 01:52:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:52:15 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:52:15 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src122_src_b10.pi.gz
[Sun Apr  8 01:52:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src122_bgd.pi.gz
[Sun Apr  8 04:47:15 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:15 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src122_src_b10.pi.gz
[Sun Apr  8 04:47:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:18 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src122.arf
[Sun Apr  8 04:47:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:18 2012] Updating source flux to 1.6e-14
[Sun Apr  8 04:52:35 2012] Flag b found in src. 122 procflags, skipping spectral fitting