[Fri Apr  6 15:45:20 2012] Detection parameters:
  Position = (336.0, 311.3) = 8 9 47.22 -49 13 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2218.3 +/- 59.3
  Background counts = 114.3
  Rate = 0.02 +/- 0.0006

[Fri Apr  6 15:45:22 2012] Off-axis axis estimate = 2.88'
[Fri Apr  6 17:38:16 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 17:38:16 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Fri Apr  6 17:38:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.938
[Fri Apr  6 17:38:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.87"
[Fri Apr  6 19:32:59 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Apr  6 19:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 19:32:59 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Apr  6 19:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 19:32:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 19:33:00 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Apr  6 19:33:00 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Apr  6 19:33:00 2012] Fit fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Apr  6 21:14:54 2012] Spatial fit model total counts = 2400.000000, observed total counts = 2400.000000
[Fri Apr  6 21:14:54 2012] Offset between fit and detection position for source 3 = 0.232369 pixels
[Fri Apr  6 21:14:54 2012] 2396.060000 total counts/ 988.610000 bgd. counts: snr = 44.763133
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.232369 pixels
  Position = (335.9, 311.4) = 8 9 47.30 -49 13 4.6
  Extent = 5.0 (4.8-5.3)", rotation angle = 0
  Source counts = 1407.5 +/- 48.9
  Background counts = 988.6
  Rate = 0.01 +/- 0.0004
[Fri Apr  6 21:14:55 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:55 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:14:55 2012] Source does appear to be extended
[Fri Apr  6 21:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:40:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:40:36 2012] Initial guess for spatial extent in simple fitting = 5.00"
[Fri Apr  6 23:40:36 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.103
[Fri Apr  6 23:40:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.00"
[Sat Apr  7 01:21:27 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Apr  7 01:21:27 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Apr  7 01:21:27 2012] Fit fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Apr  7 01:21:28 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Apr  7 01:21:28 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Apr  7 01:21:28 2012] Fit fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Apr  7 03:14:42 2012] Spatial fit model total counts = 2400.000000, observed total counts = 2400.000000
[Sat Apr  7 03:14:42 2012] Offset between fit and detection position for source 3 = 0.000135 pixels
[Sat Apr  7 03:14:42 2012] 2396.062000 total counts/ 986.122000 bgd. counts: snr = 44.898859
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000135 pixels
  Position = (335.9, 311.4) = 8 9 47.30 -49 13 4.6
  Extent = 5.0 (4.8-5.3)", rotation angle = 0
  Source counts = 1409.9 +/- 48.9
  Background counts = 986.1
  Rate = 0.01 +/- 0.0004
[Sat Apr  7 03:14:42 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:42 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:42 2012] Source does appear to be extended
[Sat Apr  7 03:14:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:24:22 2012] Counts = 1409.940000, rescaling region sizes by 2.000000
[Sat Apr  7 23:24:22 2012] XMMSAS src. selection expression = ellipse(29171.933060, 27045.155000, 602.715617, 602.715617, 0.000000, X, Y)
[Sat Apr  7 23:24:22 2012] Writing source region out to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src3_src.reg
[Sat Apr  7 23:24:22 2012] Extracting stamp from image fullrun_mos1_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (301, 277) - (371, 346)
[Sat Apr  7 23:24:22 2012] XMMSAS bgd. selection expression = annulus(29171.933060, 27045.155000, 2009.052058, 4018.104116, X, Y) && !ellipse(29404.146200, 22740.840800, 431.291212, 431.291212, 0.000000, X, Y) && !ellipse(25120.953400, 22827.905800, 389.502411, 389.502411, 0.000000, X, Y) && !ellipse(29059.657400, 28866.364200, 509.838415, 509.838415, 0.000000, X, Y) && !ellipse(25093.637800, 28026.028000, 337.900810, 337.900810, 0.000000, X, Y) && !ellipse(31198.713740, 25494.698800, 415.726412, 415.726412, 0.000000, X, Y) && !ellipse(28845.082460, 31203.263600, 426.622412, 426.622412, 0.000000, X, Y) && !ellipse(25288.351654, 26950.546021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24912.256800, 23915.073400, 286.879208, 286.879208, 0.000000, X, Y) && !ellipse(25219.818000, 29858.028600, 358.253610, 358.253610, 0.000000, X, Y) && !ellipse(33098.778778, 27663.187744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27182.386516, 30977.089000, 808.560023, 217.092806, 41.996983, X, Y) && !ellipse(26324.317535, 23822.663971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30814.044600, 24659.581823, 384.011211, 384.011211, 0.000000, X, Y) && !ellipse(33348.155462, 28456.617960, 615.158635, 355.787060, 89.979293, X, Y) && !ellipse(24999.814000, 27257.018000, 1109.256032, 1109.256032, 0.000000, X, Y) && !ellipse(33340.160767, 30807.838959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28739.364044, 23154.501953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.813354, 23100.562378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.403200, 25435.412000, 261.254408, 261.254408, 0.000000, X, Y) && !ellipse(24785.292633, 24292.736908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32805.867981, 25284.586823, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 23:24:22 2012] Writing fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src3.gif
[Sat Apr  7 23:25:22 2012] Mean detx,y = (-1142.91, -4798.23) 
[Sat Apr  7 23:25:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 23:25:39 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 23:25:39 2012] Setting source spectrum file to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Apr  7 23:25:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Apr  8 04:47:11 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:11 2012] Error reading totcts from fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Apr  8 04:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:13 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src3.arf
[Sun Apr  8 04:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:13 2012] Updating source flux to 1.6e-13