[Fri Apr  6 15:45:22 2012] Detection parameters:
  Position = (308.7, 86.4) = 8 9 59.33 -49 29 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.2 +/- 19.0
  Background counts = 79.7
  Rate = 0.0008 +/- 0.0002

[Fri Apr  6 15:45:22 2012] Off-axis axis estimate = 15.39'
[Fri Apr  6 17:38:16 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 17:38:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 17:38:16 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Fri Apr  6 17:38:16 2012] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Fri Apr  6 17:38:16 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 14.12"
[Fri Apr  6 19:33:00 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src98.ximg exists
[Fri Apr  6 19:33:00 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src98_1.ximg exists
[Fri Apr  6 19:33:00 2012] Fit fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src98 appears to have run properly
[Fri Apr  6 19:33:01 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Fri Apr  6 19:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src98.csv
[Fri Apr  6 19:33:01 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Fri Apr  6 19:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src98.csv
[Fri Apr  6 19:33:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:55 2012] Warning: source 98 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 105 at 16.782136 pixels away
[Fri Apr  6 21:14:55 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:55 2012] Assessing source extent using major
[Fri Apr  6 21:14:55 2012] Source does appear to be extended
[Fri Apr  6 21:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:40:36 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:40:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 23:40:36 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Fri Apr  6 23:40:36 2012] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Fri Apr  6 23:40:36 2012] Giving source the simple spatial ID 97 for pass 1, mean size = 14.12"
[Sat Apr  7 01:21:28 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src97.ximg exists
[Sat Apr  7 01:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src97.csv
[Sat Apr  7 01:21:28 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src97_1.ximg exists
[Sat Apr  7 01:21:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src97.csv
[Sat Apr  7 01:21:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 01:21:29 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src97.ximg exists
[Sat Apr  7 01:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src97.csv
[Sat Apr  7 01:21:29 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src97_1.ximg exists
[Sat Apr  7 01:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src97.csv
[Sat Apr  7 01:21:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:42 2012] Warning: source 95 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 105 at 13.967542 pixels away
[Sat Apr  7 03:14:42 2012] Warning, spatial fit 97 centroid is now closest to src. 68
[Sat Apr  7 03:14:42 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:42 2012] Assessing source extent using major
[Sat Apr  7 03:14:42 2012] Source does appear to be extended
[Sat Apr  7 03:14:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:24:24 2012] XMMSAS src. selection expression = ellipse(26808.658600, 7471.397888, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 23:24:24 2012] Writing source region out to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src105_src.reg
[Sat Apr  7 23:24:24 2012] Extracting stamp from image fullrun_mos1_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (271, 49) - (346, 124)
[Sat Apr  7 23:24:24 2012] XMMSAS bgd. selection expression = annulus(26808.658600, 7471.397888, 1087.500000, 2175.000000, X, Y) && !ellipse(28538.468597, 9857.928055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.096161, 8867.529114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27037.134491, 8744.544838, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 23:24:24 2012] Writing fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src105.gif
[Sat Apr  7 23:50:31 2012] Mean detx,y = (15799.15, 5204.78) 
[Sat Apr  7 23:50:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 23:50:41 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 23:50:41 2012] Setting source spectrum file to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Sat Apr  7 23:50:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Sun Apr  8 01:32:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Apr  8 01:32:53 2012] rmf not generated due to insufficient counts
[Sun Apr  8 04:47:12 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:12 2012] Error reading totcts from fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Sun Apr  8 04:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:14 2012] Using photon index=1.80, rate=0.000847, arf fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src105.arf
[Sun Apr  8 04:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:14 2012] Updating source flux to 2.3e-14
[Sun Apr  8 04:47:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting