[Fri Apr  6 15:45:20 2012] Detection parameters:
  Position = (338.6, 262.0) = 8 9 46.07 -49 16 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6420.6 +/- 97.8
  Background counts = 118.9
  Rate = 0.06 +/- 0.0009

[Fri Apr  6 15:45:22 2012] Off-axis axis estimate = 3.93'
[Fri Apr  6 17:38:16 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 17:38:16 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Apr  6 17:38:16 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Fri Apr  6 17:38:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.40"
[Fri Apr  6 19:32:59 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Apr  6 19:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 19:32:59 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Apr  6 19:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 19:32:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 19:33:00 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Apr  6 19:33:00 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Apr  6 19:33:00 2012] Fit fullrun_mos1_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Apr  6 21:14:54 2012] Spatial fit model total counts = 6147.050000, observed total counts = 6125.000000
[Fri Apr  6 21:14:54 2012] Offset between fit and detection position for source 1 = 0.055903 pixels
[Fri Apr  6 21:14:54 2012] 6137.690000 total counts/ 1817.350000 bgd. counts: snr = 101.344139
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055903 pixels
  Position = (338.5, 261.9) = 8 9 46.10 -49 16 39.8
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 4320.3 +/- 78.3
  Background counts = 1817.3
  Rate = 0.04 +/- 0.0007
[Fri Apr  6 21:14:55 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:55 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:14:55 2012] Source does appear to be extended
[Fri Apr  6 21:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 23:40:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 23:40:36 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Fri Apr  6 23:40:36 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.996
[Fri Apr  6 23:40:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.38"
[Sat Apr  7 01:21:27 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Apr  7 01:21:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 01:21:27 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Apr  7 01:21:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 01:21:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 01:21:28 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr  7 01:21:28 2012] fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr  7 01:21:28 2012] Fit fullrun_mos1_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr  7 03:14:42 2012] Spatial fit model total counts = 6134.090000, observed total counts = 6125.000000
[Sat Apr  7 03:14:42 2012] Offset between fit and detection position for source 1 = 0.000037 pixels
[Sat Apr  7 03:14:42 2012] 6124.870000 total counts/ 1810.620000 bgd. counts: snr = 101.389189
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000037 pixels
  Position = (338.5, 261.9) = 8 9 46.10 -49 16 39.8
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 4314.2 +/- 78.3
  Background counts = 1810.6
  Rate = 0.04 +/- 0.0007
[Sat Apr  7 03:14:42 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:42 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:42 2012] Source does appear to be extended
[Sat Apr  7 03:14:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 23:24:22 2012] Counts = 4314.250000, rescaling region sizes by 2.000000
[Sat Apr  7 23:24:22 2012] XMMSAS src. selection expression = ellipse(29404.146200, 22740.840800, 646.936819, 646.936819, 0.000000, X, Y)
[Sat Apr  7 23:24:22 2012] Writing source region out to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1_src.reg
[Sat Apr  7 23:24:22 2012] Extracting stamp from image fullrun_mos1_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (301, 225) - (376, 299)
[Sat Apr  7 23:24:22 2012] XMMSAS bgd. selection expression = annulus(29404.146200, 22740.840800, 2156.456062, 4312.912124, X, Y) && !ellipse(29171.933060, 27045.155000, 401.810412, 401.810412, 0.000000, X, Y) && !ellipse(25120.953400, 22827.905800, 389.502411, 389.502411, 0.000000, X, Y) && !ellipse(33953.711700, 22916.068400, 410.669612, 410.669612, 0.000000, X, Y) && !ellipse(31198.713740, 25494.698800, 415.726412, 415.726412, 0.000000, X, Y) && !ellipse(27677.063400, 19443.885600, 683.828820, 683.828820, 0.000000, X, Y) && !ellipse(25288.351654, 26950.546021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24912.256800, 23915.073400, 286.879208, 286.879208, 0.000000, X, Y) && !ellipse(33098.778778, 27663.187744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26324.317535, 23822.663971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30814.044600, 24659.581823, 384.011211, 384.011211, 0.000000, X, Y) && !ellipse(29492.901600, 21571.364000, 288.101608, 288.101608, 0.000000, X, Y) && !ellipse(34108.289948, 21636.714630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24999.814000, 27257.018000, 1109.256032, 1109.256032, 0.000000, X, Y) && !ellipse(28739.364044, 23154.501953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30939.653198, 20316.757523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.813354, 23100.562378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.403200, 25435.412000, 261.254408, 261.254408, 0.000000, X, Y) && !ellipse(24785.292633, 24292.736908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32805.867981, 25284.586823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29292.876587, 21945.538345, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 23:24:22 2012] Writing fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1.gif
[Sat Apr  7 23:24:30 2012] Mean detx,y = (2898.02, -3293.47) 
[Sat Apr  7 23:24:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 23:25:02 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 23:25:02 2012] Setting source spectrum file to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr  7 23:25:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Apr  8 04:47:11 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:11 2012] Error reading totcts from fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  8 04:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:13 2012] Using photon index=1.80, rate=0.0368, arf fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1.arf
[Sun Apr  8 04:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:13 2012] Updating source flux to 4.5e-13
[Sun Apr  8 04:52:35 2012] Reading fit data from xmm0501790101/analysis//spectral/fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Apr  8 04:52:35 2012] Spectral fit parameter nH value = 2.40492e+21
[Sun Apr  8 04:52:35 2012] Spectral fit parameter PhoIndex value = 1.74084
[Sun Apr  8 04:52:35 2012] Failed to get F(0.3-8.0) from xmm0501790101/analysis//spectral/fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Apr  8 04:52:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:52:35 2012] Using Nh = 2.4e+21, photon index=1.74, rate=0.0368, arf fullrun_mos1_xmm0501790101_pi300-10000_pass1_cl_src1.arf
[Sun Apr  8 04:52:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:52:35 2012] Updating source flux to 5.6e-13