[Tue Jan  3 05:59:03 2012] Detection parameters:
  Position = (208.6, 185.0) = 8 15 30.93 -19 9 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 323.1 +/- 22.8
  Background counts = 19.2
  Rate = 0.01 +/- 0.0008

[Tue Jan  3 05:59:04 2012] Off-axis axis estimate = 10.49'
[Tue Jan  3 06:01:20 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 06:01:20 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Tue Jan  3 06:01:20 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Tue Jan  3 06:01:20 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.67"
[Tue Jan  3 07:09:07 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jan  3 07:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_src7.csv
[Tue Jan  3 07:09:07 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jan  3 07:09:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_src7.csv
[Tue Jan  3 07:09:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 07:09:07 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jan  3 07:09:07 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jan  3 07:09:07 2012] Fit fullrun_mos1_xmm0501750801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jan  3 08:08:25 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.787251 pixels away
[Tue Jan  3 08:08:25 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 08:08:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 08:08:25 2012] Assessing source extent using major
[Tue Jan  3 08:08:25 2012] Source does appear to be extended
[Tue Jan  3 08:08:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 08:08:45 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 08:08:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan  3 08:08:45 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Tue Jan  3 08:08:45 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Tue Jan  3 08:08:45 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.67"
[Tue Jan  3 09:15:42 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan  3 09:15:42 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan  3 09:15:42 2012] Fit fullrun_mos1_xmm0501750801_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue Jan  3 09:15:42 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan  3 09:15:42 2012] fullrun_mos1_xmm0501750801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan  3 09:15:42 2012] Fit fullrun_mos1_xmm0501750801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan  3 10:08:24 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.900490 pixels away
[Tue Jan  3 10:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 10:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 10:08:24 2012] Assessing source extent using major
[Tue Jan  3 10:08:24 2012] Source does appear to be extended
[Tue Jan  3 10:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 10:08:45 2012] XMMSAS src. selection expression = ellipse(18097.811478, 16048.004074, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan  3 10:08:45 2012] Writing source region out to fullrun_mos1_xmm0501750801_pi300-10000_pass1_cl_src7_src.reg
[Tue Jan  3 10:08:45 2012] Extracting stamp from image fullrun_mos1_xmm0501750801_pi300-10000_cl_sm2.00.img.gz, (171, 148) - (246, 223)
[Tue Jan  3 10:08:45 2012] XMMSAS bgd. selection expression = annulus(18097.811478, 16048.004074, 1087.500000, 2175.000000, X, Y)
[Tue Jan  3 10:08:45 2012] Writing fullrun_mos1_xmm0501750801_pi300-10000_pass1_cl_src7.gif
[Tue Jan  3 10:11:20 2012] Mean detx,y = (7430.46, 7607.01) 
[Tue Jan  3 10:11:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 10:12:09 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 10:12:10 2012] Setting source spectrum file to fullrun_mos1_xmm0501750801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan  3 10:12:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501750801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jan  3 10:37:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan  3 10:37:03 2012] rmf not generated due to insufficient counts
[Tue Jan  3 11:44:01 2012] Updating aperture counts using extracted products
[Tue Jan  3 11:44:01 2012] Error reading totcts from fullrun_mos1_xmm0501750801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan  3 11:44:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 11:44:02 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0501750801_pi300-10000_pass1_cl_src7.arf
[Tue Jan  3 11:44:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 11:44:02 2012] Updating source flux to 1.7e-13
[Tue Jan  3 11:44:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting