[Wed Nov 30 23:52:21 2011] Detection parameters:
  Position = (219.0, 301.2) = 13 14 58.49 -25 16 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.2 +/- 14.6
  Background counts = 46.8
  Rate = 0.002 +/- 0.0004

[Wed Nov 30 23:52:22 2011] Off-axis axis estimate = 5.76'
[Thu Dec  1 03:30:31 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 03:30:31 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Dec  1 03:30:31 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Thu Dec  1 03:30:31 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 9.31"
[Thu Dec  1 04:46:22 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Dec  1 04:46:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src28.csv
[Thu Dec  1 04:46:22 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Dec  1 04:46:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src28.csv
[Thu Dec  1 04:46:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 04:46:23 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Dec  1 04:46:23 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Dec  1 04:46:23 2011] Fit fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Dec  1 04:46:51 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.530564 pixels away
[Thu Dec  1 04:46:51 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:51 2011] Assessing source extent using major
[Thu Dec  1 04:46:51 2011] Source does appear to be extended
[Thu Dec  1 04:46:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 07:33:51 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 07:33:51 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Dec  1 07:33:51 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Thu Dec  1 07:33:51 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 9.31"
[Thu Dec  1 08:32:55 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src27.ximg exists
[Thu Dec  1 08:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src27.csv
[Thu Dec  1 08:32:55 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Dec  1 08:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src27.csv
[Thu Dec  1 08:32:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 08:32:56 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Dec  1 08:32:56 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Dec  1 08:32:56 2011] Fit fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Dec  1 08:33:19 2011] Spatial fit model total counts = 325.999000, observed total counts = 326.000000
[Thu Dec  1 08:33:19 2011] Offset between fit and detection position for source 30 = 0.845384 pixels
[Thu Dec  1 08:33:19 2011] 317.216000 total counts/ 212.074000 bgd. counts: snr = 7.219922
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.845384 pixels
  Position = (219.8, 301.0) = 13 14 58.23 -25 16 42.1
  Extent = 10.1 (6.7-14.2)", rotation angle = 0
  Source counts = 105.1 +/- 17.8
  Background counts = 212.1
  Rate = 0.002 +/- 0.0003
[Thu Dec  1 08:33:20 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 08:33:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 08:33:20 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 08:33:20 2011] Source does appear to be extended
[Thu Dec  1 08:33:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 13:08:41 2011] XMMSAS src. selection expression = ellipse(19074.086000, 26139.500400, 605.856017, 605.856017, 0.000000, X, Y)
[Thu Dec  1 13:08:41 2011] Writing source region out to fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src30_src.reg
[Thu Dec  1 13:08:41 2011] Extracting stamp from image fullrun_mos2_xmm0501730101_pi300-10000_cl_sm2.00.img.gz, (185, 266) - (255, 336)
[Thu Dec  1 13:08:41 2011] XMMSAS bgd. selection expression = annulus(19074.086000, 26139.500400, 1009.760029, 2019.520058, X, Y)
[Thu Dec  1 13:08:41 2011] Writing fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src30.gif
[Thu Dec  1 13:20:02 2011] Mean detx,y = (7191.54, 1747.61) 
[Thu Dec  1 13:20:03 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 13:20:26 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 13:20:26 2011] Setting source spectrum file to fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Dec  1 13:20:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Dec  1 14:54:58 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:54:58 2011] Error reading totcts from fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Dec  1 14:54:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:54:58 2011] Using photon index=1.80, rate=0.00202, arf fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src30.arf
[Thu Dec  1 14:54:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:54:58 2011] Updating source flux to 3.2e-14