[Wed Nov 30 23:52:21 2011] Detection parameters:
  Position = (327.0, 318.0) = 13 14 23.85 -25 15 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1313.3 +/- 50.7
  Background counts = 133.7
  Rate = 0.02 +/- 0.0009

[Wed Nov 30 23:52:22 2011] Off-axis axis estimate = 2.51'
[Thu Dec  1 03:30:31 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 03:30:31 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Dec  1 03:30:31 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Thu Dec  1 03:30:31 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.68"
[Thu Dec  1 04:46:22 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Dec  1 04:46:22 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Dec  1 04:46:22 2011] Fit fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Dec  1 04:46:22 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Dec  1 04:46:22 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Dec  1 04:46:22 2011] Fit fullrun_mos2_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Dec  1 04:46:51 2011] Spatial fit model total counts = 6967.470000, observed total counts = 6966.000000
[Thu Dec  1 04:46:51 2011] Offset between fit and detection position for source 2 = 5.638465 pixels
[Thu Dec  1 04:46:51 2011] 6691.532000 total counts/ 5874.260000 bgd. counts: snr = 10.663261
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.638465 pixels
  Position = (331.4, 321.5) = 13 14 22.44 -25 15 13.0
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 817.3 +/- 81.8
  Background counts = 5874.3
  Rate = 0.02 +/- 0.002
[Thu Dec  1 04:46:51 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:51 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 04:46:51 2011] Source does appear to be extended
[Thu Dec  1 04:46:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 07:33:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 07:33:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 07:33:51 2011] Initial guess for spatial extent in simple fitting = 15.37"
[Thu Dec  1 07:33:51 2011] source mask rpix=3.5, npix_max = 65, mask sum = 72, frac = 1.107
[Thu Dec  1 07:33:51 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 15.37"
[Thu Dec  1 08:32:55 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Dec  1 08:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src2.csv
[Thu Dec  1 08:32:55 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Dec  1 08:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src2.csv
[Thu Dec  1 08:32:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 08:32:56 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Dec  1 08:32:56 2011] fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Dec  1 08:32:56 2011] Fit fullrun_mos2_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Dec  1 08:33:19 2011] Source 2 is offset by -2.316529 and -6.217954 pixels which is larger than
2 X fitted extent = 1.716152 x 1.716152, not incorporating fit results
[Thu Dec  1 08:33:19 2011] Warning, spatial fit 2 centroid is now closest to src. 35
[Thu Dec  1 08:33:19 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 08:33:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 08:33:19 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 08:33:19 2011] Source does appear to be extended
[Thu Dec  1 08:33:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 13:08:41 2011] XMMSAS src. selection expression = ellipse(28784.402000, 27922.978000, 922.032027, 922.032027, 0.000000, X, Y)
[Thu Dec  1 13:08:41 2011] Writing source region out to fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec  1 13:08:41 2011] Extracting stamp from image fullrun_mos2_xmm0501730101_pi300-10000_cl_sm2.00.img.gz, (278, 269) - (384, 375)
[Thu Dec  1 13:08:41 2011] XMMSAS bgd. selection expression = annulus(28784.402000, 27922.978000, 1536.720044, 3073.440088, X, Y) && !ellipse(27822.560000, 27203.414200, 1194.440034, 1194.440034, 0.000000, X, Y) && !ellipse(26546.594600, 27298.665600, 1024.480029, 1024.480029, 0.000000, X, Y) && !ellipse(27046.833313, 26901.982880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.928314, 28671.212097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24770.590000, 28446.016000, 1169.816034, 1169.816034, 0.000000, X, Y) && !ellipse(26231.627808, 25382.241455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27973.425262, 25006.668976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.792694, 24960.328094, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 13:08:41 2011] Writing fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src2.gif
[Thu Dec  1 13:12:54 2011] Mean detx,y = (-2120.79, -1198.85) 
[Thu Dec  1 13:12:55 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 13:13:06 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 13:13:06 2011] Setting source spectrum file to fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 13:13:06 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec  1 14:54:57 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:54:57 2011] Error reading totcts from fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 14:54:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:54:58 2011] Using photon index=1.80, rate=0.0157, arf fullrun_mos2_xmm0501730101_pi300-10000_pass1_cl_src2.arf
[Thu Dec  1 14:54:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:54:58 2011] Updating source flux to 1.4e-13
[Thu Dec  1 14:56:19 2011] Flag b found in src. 2 procflags, skipping spectral fitting