[Wed Nov 30 23:51:49 2011] Detection parameters:
  Position = (318.0, 298.2) = 13 14 26.75 -25 16 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 344.8 +/- 30.0
  Background counts = 121.6
  Rate = 0.006 +/- 0.0006

[Wed Nov 30 23:51:50 2011] Off-axis axis estimate = 1.42'
[Thu Dec  1 01:53:15 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 01:53:15 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Dec  1 01:53:15 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Thu Dec  1 01:53:15 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.14"
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src6.csv
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src6.csv
[Thu Dec  1 03:30:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Dec  1 03:30:31 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Dec  1 04:46:43 2011] Source 7 is offset by 0.113609 and -6.667513 pixels which is larger than
2 X fitted extent = 1.418924 x 1.418924, not incorporating fit results
[Thu Dec  1 04:46:43 2011] Source 7 is offset by -1.935509 and 4.704878 pixels which is larger than
2 X fitted extent = 0.916060 x 0.916060, not incorporating fit results
[Thu Dec  1 04:46:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:43 2011] Assessing source extent using major
[Thu Dec  1 04:46:43 2011] Source does appear to be extended
[Thu Dec  1 04:46:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 06:16:09 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 06:16:09 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Dec  1 06:16:09 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Thu Dec  1 06:16:09 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.14"
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src6.csv
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src6.csv
[Thu Dec  1 07:33:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Dec  1 07:33:50 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Dec  1 08:33:13 2011] Source 7 is offset by -1.753224 and -7.356731 pixels which is larger than
2 X fitted extent = 6.562023 x 6.562023, not incorporating fit results
[Thu Dec  1 08:33:13 2011] Spatial fit model total counts = 1664.950000, observed total counts = 1663.000000
[Thu Dec  1 08:33:13 2011] Offset between fit and detection position for source 7 = 1.845445 pixels
[Thu Dec  1 08:33:13 2011] Warning, changing simple spatial fit ID from 6 to 28
[Thu Dec  1 08:33:13 2011] 1675.939500 total counts/ 1656.790000 bgd. counts: snr = 0.470461
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.845445 pixels
  Position = (317.2, 296.5) = 13 14 27.00 -25 17 1.7
  Extent = 3.6 (1.8-14.2)", rotation angle = 0
  Source counts = 19.1 +/- 40.9
  Background counts = 1656.8
  Rate = 0.0004 +/- 0.0008
  Deleting source due to low Poisson probability