[Wed Nov 30 23:51:50 2011] Detection parameters:
  Position = (279.9, 256.0) = 13 14 38.95 -25 19 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.5 +/- 16.2
  Background counts = 78.8
  Rate = 0.003 +/- 0.0004

[Wed Nov 30 23:51:50 2011] Off-axis axis estimate = 3.36'
[Thu Dec  1 01:53:15 2011] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 01:53:15 2011] Initial guess for spatial extent in simple fitting = 8.11"
[Thu Dec  1 01:53:15 2011] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.626
[Thu Dec  1 01:53:15 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 8.11"
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src27.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src27.csv
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src27.csv
[Thu Dec  1 03:30:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Dec  1 03:30:31 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Dec  1 04:46:43 2011] Source 46 is offset by -4.461928 and 3.643565 pixels which is larger than
2 X fitted extent = 0.965228 x 0.965228, not incorporating fit results
[Thu Dec  1 04:46:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:43 2011] Assessing source extent using major
[Thu Dec  1 04:46:43 2011] Source does appear to be extended
[Thu Dec  1 04:46:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 06:16:09 2011] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 06:16:09 2011] Initial guess for spatial extent in simple fitting = 8.11"
[Thu Dec  1 06:16:09 2011] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.626
[Thu Dec  1 06:16:09 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 8.11"
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src22.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src22.csv
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src22.csv
[Thu Dec  1 07:33:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 07:33:51 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Dec  1 07:33:51 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Dec  1 07:33:51 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Dec  1 08:33:13 2011] Spatial fit model total counts = 753.069000, observed total counts = 754.000000
[Thu Dec  1 08:33:13 2011] Offset between fit and detection position for source 46 = 4.479778 pixels
[Thu Dec  1 08:33:13 2011] 751.172000 total counts/ 608.678000 bgd. counts: snr = 5.775675
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 4.479778 pixels
  Position = (275.8, 254.2) = 13 14 40.27 -25 20 5.7
  Extent = 16.2 (16.2-32.4)", rotation angle = 0
  Source counts = 142.5 +/- 27.4
  Background counts = 608.7
  Rate = 0.003 +/- 0.0005
[Thu Dec  1 08:33:13 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 08:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 08:33:13 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 08:33:13 2011] Source does appear to be extended
[Thu Dec  1 08:33:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 12:13:33 2011] XMMSAS src. selection expression = ellipse(23947.744000, 22068.638000, 972.852028, 972.852028, 0.000000, X, Y)
[Thu Dec  1 12:13:33 2011] Writing source region out to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src46_src.reg
[Thu Dec  1 12:13:33 2011] Extracting stamp from image fullrun_mos1_xmm0501730101_pi300-10000_cl_sm2.00.img.gz, (220, 198) - (332, 310)
[Thu Dec  1 12:13:33 2011] XMMSAS bgd. selection expression = annulus(23947.744000, 22068.638000, 1621.420047, 3242.840093, X, Y) && !ellipse(26113.646271, 25972.956268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21361.539120, 20551.049540, 510.803215, 510.803215, 0.000000, X, Y) && !ellipse(26734.407600, 23734.692600, 305.952809, 305.952809, 0.000000, X, Y) && !ellipse(21463.671000, 20653.793820, 1021.608029, 1021.608029, 0.000000, X, Y) && !ellipse(27332.798553, 25097.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.546173, 24796.321625, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 12:13:33 2011] Writing fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src46.gif
[Thu Dec  1 12:18:05 2011] Mean detx,y = (-3897.09, -4896.66) 
[Thu Dec  1 12:18:06 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 12:18:45 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 12:18:45 2011] Setting source spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Dec  1 12:18:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Dec  1 14:54:57 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:54:57 2011] Error reading totcts from fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Dec  1 14:54:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:54:57 2011] Using photon index=1.80, rate=0.00274, arf fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src46.arf
[Thu Dec  1 14:54:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:54:57 2011] Updating source flux to 3.3e-14
[Thu Dec  1 14:55:00 2011] Flag b found in src. 46 procflags, skipping spectral fitting