[Wed Nov 30 23:51:50 2011] Detection parameters:
  Position = (402.7, 322.7) = 13 13 59.58 -25 15 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.0 +/- 18.1
  Background counts = 49.0
  Rate = 0.005 +/- 0.0005

[Wed Nov 30 23:51:50 2011] Off-axis axis estimate = 7.76'
[Thu Dec  1 01:53:15 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 01:53:15 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Thu Dec  1 01:53:15 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Thu Dec  1 01:53:15 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 10.31"
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src9.csv
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src9.csv
[Thu Dec  1 03:30:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Dec  1 03:30:31 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Dec  1 04:46:43 2011] Warning, spatial fit 9 centroid is now closest to src. 27
[Thu Dec  1 04:46:43 2011] Source 34 is offset by 4.659649 and -4.588445 pixels which is larger than
2 X fitted extent = 1.252400 x 1.252400, not incorporating fit results
[Thu Dec  1 04:46:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:43 2011] Assessing source extent using major
[Thu Dec  1 04:46:43 2011] Source does appear to be extended
[Thu Dec  1 04:46:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 06:16:09 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 06:16:09 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Thu Dec  1 06:16:09 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Thu Dec  1 06:16:09 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 10.31"
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src9.csv
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src9.csv
[Thu Dec  1 07:33:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 07:33:51 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Dec  1 07:33:51 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Dec  1 07:33:51 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Dec  1 08:33:13 2011] Spatial fit model total counts = 494.995000, observed total counts = 495.000000
[Thu Dec  1 08:33:13 2011] Offset between fit and detection position for source 34 = 0.490691 pixels
[Thu Dec  1 08:33:13 2011] 486.757500 total counts/ 405.617000 bgd. counts: snr = 4.028836
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.490691 pixels
  Position = (402.3, 322.9) = 13 13 59.72 -25 15 6.7
  Extent = 5.4 (4.2-7.2)", rotation angle = 0
  Source counts = 81.1 +/- 22.1
  Background counts = 405.6
  Rate = 0.002 +/- 0.0004
[Thu Dec  1 08:33:13 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 08:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 08:33:13 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 08:33:13 2011] Source does appear to be extended
[Thu Dec  1 08:33:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 12:13:32 2011] XMMSAS src. selection expression = ellipse(34948.563000, 28045.833660, 326.529609, 326.529609, 0.000000, X, Y)
[Thu Dec  1 12:13:32 2011] Writing source region out to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src34_src.reg
[Thu Dec  1 12:13:32 2011] Extracting stamp from image fullrun_mos1_xmm0501730101_pi300-10000_cl_sm2.00.img.gz, (383, 304) - (421, 342)
[Thu Dec  1 12:13:32 2011] XMMSAS bgd. selection expression = annulus(34948.563000, 28045.833660, 544.216016, 1088.432031, X, Y) && !ellipse(35303.169952, 29194.831665, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 12:13:32 2011] Writing fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src34.gif
[Thu Dec  1 12:15:08 2011] Mean detx,y = (-3810.81, 7584.18) 
[Thu Dec  1 12:15:09 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 12:15:17 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 12:15:17 2011] Setting source spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Dec  1 12:15:17 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Dec  1 12:50:53 2011] Not generating rmf since there are only 81 counts
[Thu Dec  1 12:50:53 2011] rmf not generated due to insufficient counts
[Thu Dec  1 14:54:56 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:54:56 2011] Error reading totcts from fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Dec  1 14:54:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:54:57 2011] Using photon index=1.80, rate=0.00156, arf fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src34.arf
[Thu Dec  1 14:54:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:54:57 2011] Updating source flux to 2.7e-14
[Thu Dec  1 14:55:00 2011] Flag b found in src. 34 procflags, skipping spectral fitting
[Thu Dec  1 14:55:00 2011] Source 34 has fewer than 100.000000 counts, skipping spectral fitting