[Wed Nov 30 23:51:49 2011] Detection parameters:
  Position = (457.3, 327.7) = 13 13 42.08 -25 14 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 807.0 +/- 36.9
  Background counts = 72.8
  Rate = 0.01 +/- 0.0006

[Wed Nov 30 23:51:50 2011] Off-axis axis estimate = 11.71'
[Thu Dec  1 01:53:15 2011] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 01:53:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 01:53:15 2011] Initial guess for spatial extent in simple fitting = 12.28"
[Thu Dec  1 01:53:15 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.109
[Thu Dec  1 01:53:15 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.28"
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec  1 03:30:30 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec  1 03:30:31 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec  1 04:46:43 2011] Spatial fit model total counts = 998.668000, observed total counts = 1060.000000
[Thu Dec  1 04:46:43 2011] Offset between fit and detection position for source 3 = 0.347703 pixels
[Thu Dec  1 04:46:43 2011] 1001.751000 total counts/ 524.755000 bgd. counts: snr = 20.822671
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.347703 pixels
  Position = (457.0, 327.5) = 13 13 42.16 -25 14 46.6
  Extent = 8.0" x 4.6", rotation angle = 77
  Source counts = 477.0 +/- 31.7
  Background counts = 524.8
  Rate = 0.009 +/- 0.0006
[Thu Dec  1 04:46:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:43 2011] Assessing source extent using major
[Thu Dec  1 04:46:43 2011] Source does appear to be extended
[Thu Dec  1 04:46:43 2011] Computing asymmetry using major and minor axis, asym = 1.75
[Thu Dec  1 04:46:43 2011] Source is asymmetric
[Thu Dec  1 06:16:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 06:16:09 2011] Initial guess for spatial extent in simple fitting = 6.26"
[Thu Dec  1 06:16:09 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.797
[Thu Dec  1 06:16:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 6.26"
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src3.csv
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Dec  1 07:33:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src3.csv
[Thu Dec  1 07:33:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec  1 07:33:50 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec  1 08:33:13 2011] Spatial fit model total counts = 1011.000000, observed total counts = 1011.000000
[Thu Dec  1 08:33:13 2011] Offset between fit and detection position for source 3 = 0.011736 pixels
[Thu Dec  1 08:33:13 2011] 1016.148000 total counts/ 495.236000 bgd. counts: snr = 23.407674
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.011736 pixels
  Position = (457.0, 327.5) = 13 13 42.16 -25 14 46.6
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 520.9 +/- 31.9
  Background counts = 495.2
  Rate = 0.01 +/- 0.0006
[Thu Dec  1 08:33:13 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 08:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 08:33:13 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 08:33:13 2011] Source does appear to be extended
[Thu Dec  1 08:33:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 12:13:32 2011] XMMSAS src. selection expression = ellipse(39714.003760, 28440.747000, 376.752011, 376.752011, 0.000000, X, Y)
[Thu Dec  1 12:13:32 2011] Writing source region out to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec  1 12:13:32 2011] Extracting stamp from image fullrun_mos1_xmm0501730101_pi300-10000_cl_sm2.00.img.gz, (435, 306) - (479, 349)
[Thu Dec  1 12:13:32 2011] XMMSAS bgd. selection expression = annulus(39714.003760, 28440.747000, 627.920018, 1255.840036, X, Y)
[Thu Dec  1 12:13:32 2011] Writing fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src3.gif
[Thu Dec  1 12:14:04 2011] Mean detx,y = (-5714.90, 11983.23) 
[Thu Dec  1 12:14:05 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 12:14:11 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 12:14:11 2011] Setting source spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec  1 12:14:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Dec  1 14:54:56 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:54:56 2011] Error reading totcts from fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec  1 14:54:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:54:57 2011] Using photon index=1.80, rate=0.01, arf fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src3.arf
[Thu Dec  1 14:54:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:54:57 2011] Updating source flux to 2.2e-13