[Wed Nov 30 23:51:49 2011] Detection parameters:
  Position = (194.6, 360.0) = 13 15 6.28 -25 12 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.9 +/- 15.2
  Background counts = 62.7
  Rate = 0.002 +/- 0.0003

[Wed Nov 30 23:51:50 2011] Off-axis axis estimate = 8.75'
[Thu Dec  1 01:53:15 2011] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 01:53:15 2011] Initial guess for spatial extent in simple fitting = 10.80"
[Thu Dec  1 01:53:15 2011] source mask rpix=2.5, npix_max = 35, mask sum = 20, frac = 0.562
[Thu Dec  1 01:53:15 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 10.80"
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src39.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src39.csv
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src39.csv
[Thu Dec  1 03:30:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Dec  1 03:30:31 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Dec  1 04:46:43 2011] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.540897 pixels away
[Thu Dec  1 04:46:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:43 2011] Assessing source extent using major
[Thu Dec  1 04:46:43 2011] Source does appear to be extended
[Thu Dec  1 04:46:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 06:16:09 2011] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 06:16:09 2011] Initial guess for spatial extent in simple fitting = 10.80"
[Thu Dec  1 06:16:09 2011] source mask rpix=2.5, npix_max = 35, mask sum = 20, frac = 0.562
[Thu Dec  1 06:16:09 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 10.80"
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Dec  1 07:33:50 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Dec  1 07:33:50 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_src31 appears to have run properly
[Thu Dec  1 07:33:51 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Dec  1 07:33:51 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Dec  1 07:33:51 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Dec  1 08:33:13 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.540897 pixels away
[Thu Dec  1 08:33:13 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 08:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 08:33:13 2011] Assessing source extent using major
[Thu Dec  1 08:33:13 2011] Source does appear to be extended
[Thu Dec  1 08:33:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 12:13:33 2011] XMMSAS src. selection expression = ellipse(16884.640976, 31270.127350, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec  1 12:13:33 2011] Writing source region out to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src21_src.reg
[Thu Dec  1 12:13:33 2011] Extracting stamp from image fullrun_mos1_xmm0501730101_pi300-10000_cl_sm2.00.img.gz, (157, 322) - (232, 397)
[Thu Dec  1 12:13:33 2011] XMMSAS bgd. selection expression = annulus(16884.640976, 31270.127350, 1087.500000, 2175.000000, X, Y) && !ellipse(17200.921341, 28896.589569, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec  1 12:13:33 2011] Writing fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src21.gif
[Thu Dec  1 12:21:22 2011] Mean detx,y = (7563.40, -6720.82) 
[Thu Dec  1 12:21:23 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 12:21:48 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 12:21:48 2011] Setting source spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Dec  1 12:21:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Dec  1 13:08:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec  1 13:08:13 2011] rmf not generated due to insufficient counts
[Thu Dec  1 14:54:57 2011] Updating aperture counts using extracted products
[Thu Dec  1 14:54:57 2011] Error reading totcts from fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Dec  1 14:54:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 14:54:57 2011] Using photon index=1.80, rate=0.00176, arf fullrun_mos1_xmm0501730101_pi300-10000_pass1_cl_src21.arf
[Thu Dec  1 14:54:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 14:54:57 2011] Updating source flux to 4.3e-14
[Thu Dec  1 14:55:00 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting