[Wed Nov 30 23:51:49 2011] Detection parameters:
  Position = (430.1, 409.1) = 13 13 50.82 -25 8 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.8 +/- 18.1
  Background counts = 61.9
  Rate = 0.004 +/- 0.0006

[Wed Nov 30 23:51:50 2011] Off-axis axis estimate = 12.47'
[Thu Dec  1 01:53:15 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 01:53:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 01:53:15 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Thu Dec  1 01:53:15 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Thu Dec  1 01:53:15 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 12.66"
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src11.csv
[Thu Dec  1 03:30:30 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Dec  1 03:30:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src11.csv
[Thu Dec  1 03:30:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Dec  1 03:30:31 2011] fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Dec  1 03:30:31 2011] Fit fullrun_mos1_xmm0501730101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Dec  1 04:46:43 2011] Warning, spatial fit 11 centroid is now closest to src. 16
[Thu Dec  1 04:46:43 2011] Spatial fit model total counts = 561.967000, observed total counts = 560.000000
[Thu Dec  1 04:46:43 2011] Offset between fit and detection position for source 17 = 0.713764 pixels
[Thu Dec  1 04:46:43 2011] Warning, changing simple spatial fit ID from 11 to 46
[Thu Dec  1 04:46:43 2011] 557.867300 total counts/ 515.009000 bgd. counts: snr = 1.888546
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.713764 pixels
  Position = (429.4, 409.0) = 13 13 51.05 -25 8 52.0
  Extent = 4.1 (3.3-6.0)", rotation angle = 0
  Source counts = 42.9 +/- 23.6
  Background counts = 515.0
  Rate = 0.0008 +/- 0.0005
[Thu Dec  1 04:46:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 04:46:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 04:46:43 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 04:46:43 2011] Source does appear to be extended
[Thu Dec  1 04:46:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 04:46:43 2011] Deleting source due to low Poisson probability 0.9