[Sun Apr  1 16:43:21 2012] Detection parameters:
  Position = (322.3, 300.7) = 22 2 43.21 42 16 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25063.1 +/- 188.3
  Background counts = 12.3
  Rate = 1 +/- 0.009

[Sun Apr  1 16:43:22 2012] Off-axis axis estimate = 1.74'
[Sun Apr  1 17:14:19 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Apr  1 17:14:19 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Apr  1 17:14:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Apr  1 17:14:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Apr  1 18:25:47 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Apr  1 18:25:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_src1.csv
[Sun Apr  1 18:25:47 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Apr  1 18:25:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_src1.csv
[Sun Apr  1 18:25:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 18:25:47 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Apr  1 18:25:47 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Apr  1 18:25:47 2012] Fit fullrun_mos1_xmm0501660401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Apr  1 18:47:55 2012] Spatial fit model total counts = 20188.600000, observed total counts = 21972.000000
[Sun Apr  1 18:47:55 2012] Offset between fit and detection position for source 1 = 0.380040 pixels
[Sun Apr  1 18:47:55 2012] 21221.403629 total counts/ 0.003629 bgd. counts: snr = 352269.111275
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.380040 pixels
  Position = (322.1, 300.4) = 22 2 43.31 42 16 37.8
  Extent = 7.7 (7.7-7.7)", rotation angle = 0
  Source counts = 21221.4 +/- 145.7
  Background counts = 0.0
  Rate = 0.9 +/- 0.006
[Sun Apr  1 18:47:55 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 18:47:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 18:47:55 2012] Assessing source extent using major axis lower bound
[Sun Apr  1 18:47:55 2012] Source does appear to be extended
[Sun Apr  1 18:47:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 18:52:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  1 18:52:39 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Sun Apr  1 18:52:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Sun Apr  1 18:52:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.74"
[Sun Apr  1 19:39:05 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Apr  1 19:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_src1.csv
[Sun Apr  1 19:39:05 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Apr  1 19:39:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_src1.csv
[Sun Apr  1 19:39:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 19:39:05 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Apr  1 19:39:05 2012] fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Apr  1 19:39:05 2012] Fit fullrun_mos1_xmm0501660401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Apr  1 19:55:54 2012] Spatial fit model total counts = 22170.900000, observed total counts = 22037.000000
[Sun Apr  1 19:55:54 2012] Offset between fit and detection position for source 1 = 0.141451 pixels
[Sun Apr  1 19:55:54 2012] 22317.240000 total counts/ 4952.640000 bgd. counts: snr = 246.743888
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.141451 pixels
  Position = (322.2, 300.5) = 22 2 43.26 42 16 38.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 17364.6 +/- 149.4
  Background counts = 4952.6
  Rate = 0.8 +/- 0.007
[Sun Apr  1 19:55:54 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 19:55:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 19:55:54 2012] Assessing source extent using major axis lower bound
[Sun Apr  1 19:55:54 2012] Source does appear to be extended
[Sun Apr  1 19:55:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 20:32:09 2012] Counts = 17364.600000, rescaling region sizes by 3.000000
[Sun Apr  1 20:32:09 2012] XMMSAS src. selection expression = ellipse(27981.761000, 26096.270600, 966.753028, 966.753028, 0.000000, X, Y)
[Sun Apr  1 20:32:09 2012] Writing source region out to fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1_src.reg
[Sun Apr  1 20:32:09 2012] Extracting stamp from image fullrun_mos1_xmm0501660401_pi300-10000_cl_sm2.00.img.gz, (267, 245) - (378, 356)
[Sun Apr  1 20:32:09 2012] XMMSAS bgd. selection expression = annulus(27981.761000, 26096.270600, 4833.765139, 9667.530278, X, Y) && !ellipse(33438.957062, 33010.849518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.160645, 25525.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35611.729492, 18937.641052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.091614, 25986.969513, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  1 20:32:09 2012] Writing fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1.gif
[Sun Apr  1 20:32:17 2012] Mean detx,y = (304.71, -187.12) 
[Sun Apr  1 20:32:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  1 20:35:46 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  1 20:35:46 2012] Setting source spectrum file to fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  1 20:35:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Apr  1 21:12:57 2012] Updating aperture counts using extracted products
[Sun Apr  1 21:12:57 2012] Error reading totcts from fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  1 21:12:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 21:12:57 2012] Using photon index=1.80, rate=0.773, arf fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1.arf
[Sun Apr  1 21:12:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 21:12:57 2012] Updating source flux to 7.3e-12
[Sun Apr  1 21:13:27 2012] Reading fit data from xmm0501660401/analysis//spectral/fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Apr  1 21:13:27 2012] Spectral fit parameter nH value = 2.29415e+21
[Sun Apr  1 21:13:27 2012] Spectral fit parameter PhoIndex value = 1.94873
[Sun Apr  1 21:13:27 2012] Failed to get F(0.3-8.0) from xmm0501660401/analysis//spectral/fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Apr  1 21:13:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 21:13:27 2012] Using Nh = 2.3e+21, photon index=1.95, rate=0.773, arf fullrun_mos1_xmm0501660401_pi300-10000_pass1_cl_src1.arf
[Sun Apr  1 21:13:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 21:13:27 2012] Updating source flux to 8.1e-12