[Sun Mar 18 18:03:02 2012] Detection parameters:
  Position = (436.9, 179.3) = 22 1 57.00 42 7 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.8 +/- 7.0
  Background counts = 6.8
  Rate = 0.001 +/- 0.0004

[Sun Mar 18 18:03:02 2012] Off-axis axis estimate = 13.24'
[Sun Mar 18 19:27:36 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 19:27:36 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Sun Mar 18 19:27:36 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.959
[Sun Mar 18 19:27:36 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.05"
[Sun Mar 18 20:11:02 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src18.ximg exists
[Sun Mar 18 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src18.csv
[Sun Mar 18 20:11:02 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Mar 18 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src18.csv
[Sun Mar 18 20:11:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:11:03 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Mar 18 20:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Mar 18 20:11:03 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Mar 18 20:11:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Mar 18 20:11:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:11:15 2012] Spatial fit model total counts = 113.630000, observed total counts = 82.000000
[Sun Mar 18 20:11:15 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 20:11:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 20:11:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 20:11:15 2012] Assessing source extent using major
[Sun Mar 18 20:11:15 2012] Source does appear to be extended
[Sun Mar 18 20:11:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:11:15 2012] Deleting source due to low Poisson probability 0.9