[Sun Mar 18 18:03:02 2012] Detection parameters:
  Position = (318.5, 311.0) = 22 2 43.28 42 16 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22025.6 +/- 176.6
  Background counts = 12.8
  Rate = 1 +/- 0.01

[Sun Mar 18 18:03:02 2012] Off-axis axis estimate = 1.72'
[Sun Mar 18 19:27:36 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 19:27:36 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Mar 18 19:27:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sun Mar 18 19:27:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Mar 18 20:11:02 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 20:11:02 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 20:11:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 20:11:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:11:02 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 20:11:02 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 20:11:02 2012] Fit fullrun_mos2_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 20:11:15 2012] Spatial fit model total counts = 19958.200000, observed total counts = 19395.000000
[Sun Mar 18 20:11:15 2012] Offset between fit and detection position for source 1 = 0.165097 pixels
[Sun Mar 18 20:11:15 2012] 19989.300000 total counts/ 4878.500000 bgd. counts: snr = 216.343725
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.165097 pixels
  Position = (318.3, 311.0) = 22 2 43.35 42 16 39.7
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 15110.8 +/- 141.4
  Background counts = 4878.5
  Rate = 0.8 +/- 0.007
[Sun Mar 18 20:11:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 20:11:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 20:11:15 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 20:11:15 2012] Source does appear to be extended
[Sun Mar 18 20:11:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:57:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 20:57:15 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Sun Mar 18 20:57:15 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.035
[Sun Mar 18 20:57:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.23"
[Sun Mar 18 21:24:50 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 21:24:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 21:24:50 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 21:24:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 21:24:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:24:50 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 21:24:50 2012] fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 21:24:50 2012] Fit fullrun_mos2_xmm0501660301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 21:24:56 2012] Spatial fit model total counts = 19935.400000, observed total counts = 19395.000000
[Sun Mar 18 21:24:56 2012] Offset between fit and detection position for source 1 = 0.000425 pixels
[Sun Mar 18 21:24:56 2012] 19968.670000 total counts/ 4865.670000 bgd. counts: snr = 216.516948
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000425 pixels
  Position = (318.3, 311.0) = 22 2 43.35 42 16 39.7
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 15103.0 +/- 141.3
  Background counts = 4865.7
  Rate = 0.8 +/- 0.007
[Sun Mar 18 21:24:56 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:24:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:24:56 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 21:24:56 2012] Source does appear to be extended
[Sun Mar 18 21:24:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 21:48:50 2012] Counts = 15103.000000, rescaling region sizes by 3.000000
[Sun Mar 18 21:48:50 2012] XMMSAS src. selection expression = ellipse(27647.645400, 27005.834400, 942.771627, 942.771627, 0.000000, X, Y)
[Sun Mar 18 21:48:50 2012] Writing source region out to fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 21:48:50 2012] Extracting stamp from image fullrun_mos2_xmm0501660301_pi300-10000_cl_sm2.00.img.gz, (264, 257) - (373, 365)
[Sun Mar 18 21:48:50 2012] XMMSAS bgd. selection expression = annulus(27647.645400, 27005.834400, 4713.858136, 9427.716271, X, Y) && !ellipse(33110.410461, 33953.892029, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 21:48:50 2012] Writing fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 21:48:55 2012] Mean detx,y = (59.07, 67.88) 
[Sun Mar 18 21:48:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 21:51:57 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 21:51:58 2012] Setting source spectrum file to fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 21:51:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 21:57:17 2012] Updating aperture counts using extracted products
[Sun Mar 18 21:57:17 2012] Error reading totcts from fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 21:57:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:57:17 2012] Using photon index=1.80, rate=0.778, arf fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 21:57:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:57:17 2012] Updating source flux to 8.2e-12
[Sun Mar 18 21:58:08 2012] Reading fit data from xmm0501660301/analysis//spectral/fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 18 21:58:08 2012] Spectral fit parameter nH value = 2.49061e+21
[Sun Mar 18 21:58:08 2012] Spectral fit parameter PhoIndex value = 2.03573
[Sun Mar 18 21:58:08 2012] Failed to get F(0.3-8.0) from xmm0501660301/analysis//spectral/fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 21:58:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 21:58:08 2012] Using Nh = 2.5e+21, photon index=2.04, rate=0.778, arf fullrun_mos2_xmm0501660301_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 21:58:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 21:58:08 2012] Updating source flux to 8.9e-12