[Sun Mar 18 18:02:20 2012] Detection parameters:
  Position = (391.4, 272.7) = 22 2 14.74 42 13 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.4 +/- 8.9
  Background counts = 8.5
  Rate = 0.003 +/- 0.0006

[Sun Mar 18 18:02:21 2012] Off-axis axis estimate = 6.99'
[Sun Mar 18 18:44:48 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 18:44:48 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Sun Mar 18 18:44:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.969
[Sun Mar 18 18:44:48 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.92"
[Sun Mar 18 19:27:36 2012] fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_src9.ximg exists
[Sun Mar 18 19:27:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_src9.csv
[Sun Mar 18 19:27:36 2012] fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Mar 18 19:27:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_src9.csv
[Sun Mar 18 19:27:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 19:27:36 2012] fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Mar 18 19:27:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Mar 18 19:27:36 2012] fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Mar 18 19:27:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Mar 18 19:27:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501660301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:11:09 2012] Spatial fit model total counts = 148.747000, observed total counts = 99.000000
[Sun Mar 18 20:11:09 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 20:11:09 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 20:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 20:11:09 2012] Assessing source extent using major
[Sun Mar 18 20:11:09 2012] Source does appear to be extended
[Sun Mar 18 20:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:11:09 2012] Deleting source due to low Poisson probability 0.9