[Mon Mar 12 10:28:34 2012] Detection parameters:
  Position = (436.2, 196.6) = 22 1 40.30 42 9 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.2 +/- 9.3
  Background counts = 8.4
  Rate = 0.002 +/- 0.0005

[Mon Mar 12 10:28:34 2012] Off-axis axis estimate = 12.42'
[Mon Mar 12 11:02:13 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 11:02:13 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Mon Mar 12 11:02:13 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Mon Mar 12 11:02:13 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.64"
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src9.ximg exists
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Mar 12 11:26:57 2012] Fit fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src9 appears to have run properly
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Mar 12 11:26:57 2012] Fit fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Mar 12 11:27:05 2012] Spatial fit model total counts = 131.486000, observed total counts = 130.000000
[Mon Mar 12 11:27:05 2012] Offset between fit and detection position for source 9 = 1.536994 pixels
[Mon Mar 12 11:27:05 2012] 127.391200 total counts/ 32.310000 bgd. counts: snr = 16.727313
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.536994 pixels
  Position = (437.3, 197.7) = 22 1 39.89 42 9 30.2
  Extent = 16.4 (9.1-23.0)", rotation angle = 0
  Source counts = 95.1 +/- 11.3
  Background counts = 32.3
  Rate = 0.005 +/- 0.0006
[Mon Mar 12 11:27:05 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 11:27:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 11:27:05 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 11:27:05 2012] Source does appear to be extended
[Mon Mar 12 11:27:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 11:41:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 12 11:41:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 12 11:41:50 2012] Initial guess for spatial extent in simple fitting = 16.40"
[Mon Mar 12 11:41:50 2012] source mask rpix=3.8, npix_max = 72, mask sum = 81, frac = 1.111
[Mon Mar 12 11:41:50 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 16.40"
[Mon Mar 12 11:50:18 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_src4.ximg exists
[Mon Mar 12 11:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_src4.csv
[Mon Mar 12 11:50:18 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Mar 12 11:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_src4.csv
[Mon Mar 12 11:50:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:50:18 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Mar 12 11:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Mar 12 11:50:18 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Mar 12 11:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Mar 12 11:50:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:50:23 2012] Spatial fit model total counts = 198.062000, observed total counts = 175.000000
[Mon Mar 12 11:50:23 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 12 11:50:23 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 11:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 11:50:23 2012] Assessing source extent using major axis lower bound
[Mon Mar 12 11:50:23 2012] Source does appear to be extended
[Mon Mar 12 11:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 12:29:21 2012] XMMSAS src. selection expression = ellipse(37996.644000, 17154.303800, 983.724028, 983.724028, 0.000000, X, Y)
[Mon Mar 12 12:29:21 2012] Writing source region out to fullrun_mos2_xmm0501660201_pi300-10000_pass1_cl_src9_src.reg
[Mon Mar 12 12:29:21 2012] Extracting stamp from image fullrun_mos2_xmm0501660201_pi300-10000_cl_sm2.00.img.gz, (381, 141) - (494, 254)
[Mon Mar 12 12:29:21 2012] XMMSAS bgd. selection expression = annulus(37996.644000, 17154.303800, 1639.540047, 3279.080094, X, Y)
[Mon Mar 12 12:29:21 2012] Writing fullrun_mos2_xmm0501660201_pi300-10000_pass1_cl_src9.gif
[Mon Mar 12 12:34:31 2012] Mean detx,y = (15478.33, -5503.35) 
[Mon Mar 12 12:34:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 12:35:23 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 12:35:23 2012] Setting source spectrum file to fullrun_mos2_xmm0501660201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 12 12:35:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501660201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Mar 12 12:40:25 2012] Not generating rmf since there are only 95 counts
[Mon Mar 12 12:40:25 2012] rmf not generated due to insufficient counts
[Mon Mar 12 12:41:07 2012] Updating aperture counts using extracted products
[Mon Mar 12 12:41:07 2012] Error reading totcts from fullrun_mos2_xmm0501660201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 12 12:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 12:41:07 2012] Using photon index=1.80, rate=0.00523, arf fullrun_mos2_xmm0501660201_pi300-10000_pass1_cl_src9.arf
[Mon Mar 12 12:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 12:41:07 2012] Updating source flux to 1.7e-13
[Mon Mar 12 12:42:08 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Mon Mar 12 12:42:08 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting