[Mon Mar 12 10:28:34 2012] Detection parameters:
  Position = (275.3, 308.9) = 22 2 43.27 42 17 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.1 +/- 13.2
  Background counts = 17.4
  Rate = 0.004 +/- 0.001

[Mon Mar 12 10:28:34 2012] Off-axis axis estimate = 1.84'
[Mon Mar 12 11:02:13 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon Mar 12 11:02:13 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Mon Mar 12 11:02:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.730
[Mon Mar 12 11:02:13 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.35"
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src6.ximg exists
[Mon Mar 12 11:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src6.csv
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Mar 12 11:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src6.csv
[Mon Mar 12 11:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Mar 12 11:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Mar 12 11:26:57 2012] fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Mar 12 11:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Mar 12 11:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501660201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 12 11:27:05 2012] Source 5 is offset by 5.695091 and -2.811882 pixels which is larger than
2 X fitted extent = 1.410492 x 1.410492, not incorporating fit results
[Mon Mar 12 11:27:05 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Mon Mar 12 11:27:05 2012] Vigneting correction estimate = 1.000000
[Mon Mar 12 11:27:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 12 11:27:05 2012] Assessing source extent using major
[Mon Mar 12 11:27:05 2012] Source does appear to be extended
[Mon Mar 12 11:27:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 11:27:05 2012] Deleting source due to low Poisson probability 0.9