[Tue Apr 10 18:08:53 2012] Detection parameters:
  Position = (282.2, 280.3) = 23 16 8.56 -42 35 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.8 +/- 22.5
  Background counts = 214.2
  Rate = 0.002 +/- 0.0004

[Tue Apr 10 18:08:53 2012] Off-axis axis estimate = 1.77'
[Tue Apr 10 18:09:11 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:09:11 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Apr 10 18:09:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.788
[Tue Apr 10 18:09:11 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.31"
[Tue Apr 10 18:09:12 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_src18.ximg exists
[Tue Apr 10 18:09:12 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Apr 10 18:09:12 2012] Fit fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_src18 appears to have run properly
[Tue Apr 10 18:09:12 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Apr 10 18:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Apr 10 18:09:12 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Apr 10 18:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Apr 10 18:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501650201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:09:20 2012] Source 19 is offset by 5.480292 and -7.448304 pixels which is larger than
2 X fitted extent = 6.131494 x 2.924750, not incorporating fit results
[Tue Apr 10 18:09:20 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:09:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:09:20 2012] Assessing source extent using major
[Tue Apr 10 18:09:20 2012] Source does appear to be extended
[Tue Apr 10 18:09:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:09:35 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:09:35 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Apr 10 18:09:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.788
[Tue Apr 10 18:09:35 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.31"
[Tue Apr 10 18:09:35 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_src18.ximg exists
[Tue Apr 10 18:09:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_src18.csv
[Tue Apr 10 18:09:35 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Apr 10 18:09:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_src18.csv
[Tue Apr 10 18:09:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:09:36 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Apr 10 18:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Apr 10 18:09:36 2012] fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Apr 10 18:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Apr 10 18:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501650201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:09:45 2012] Spatial fit model total counts = 1244.660000, observed total counts = 1410.000000
[Tue Apr 10 18:09:45 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 18:09:45 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:09:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:09:45 2012] Assessing source extent using major
[Tue Apr 10 18:09:45 2012] Source does appear to be extended
[Tue Apr 10 18:09:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:10:00 2012] XMMSAS src. selection expression = ellipse(24500.381439, 24335.485535, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 18:10:00 2012] Not overwriting source region fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src.reg
[Tue Apr 10 18:10:00 2012] Extracting stamp from image fullrun_pn_xmm0501650201_pi300-10000_cl_sm2.00.img.gz, (245, 243) - (320, 318)
[Tue Apr 10 18:10:00 2012] XMMSAS bgd. selection expression = annulus(24500.381439, 24335.485535, 1087.500000, 2175.000000, X, Y) && !ellipse(24067.265080, 25300.824800, 551.282416, 551.282416, 0.000000, X, Y) && !ellipse(22863.372681, 24961.849426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22277.740000, 24917.117800, 1293.968037, 1293.968037, 0.000000, X, Y) && !ellipse(22377.748000, 22596.997400, 381.215666, 381.215666, 0.000000, X, Y)
[Tue Apr 10 18:10:00 2012] Writing fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19.gif
[Tue Apr 10 18:10:03 2012] ../../xmm0501650201/products/events/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0501650201/products/events/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue Apr 10 18:10:03 2012] Mean detx,y = (-834.68, -536.15) 
[Tue Apr 10 18:10:03 2012] ../../xmm0501650201/products/images/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src.img and ../../xmm0501650201/products/images/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue Apr 10 18:10:03 2012] ../../xmm0501650201/products/spectra/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0501650201/products/spectra/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Tue Apr 10 18:10:03 2012] Setting source spectrum file to fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 18:10:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Apr 10 18:10:03 2012] ../../xmm0501650201/products/lightcurves/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0501650201/products/lightcurves/fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue Apr 10 18:10:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 18:10:09 2012] rmf not generated due to insufficient counts
[Tue Apr 10 18:10:09 2012] fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Tue Apr 10 18:11:30 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:11:30 2012] Error reading totcts from fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 18:11:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:11:30 2012] Using photon index=1.80, rate=0.00213, arf fullrun_pn_xmm0501650201_pi300-10000_pass1_cl_src19.arf
[Tue Apr 10 18:11:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 18:11:30 2012] Updating source flux to 5.5e-15
[Tue Apr 10 18:11:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting