[Sat Dec 24 04:46:05 2011] Detection parameters:
  Position = (278.9, 248.1) = 16 59 45.41 46 58 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.6 +/- 9.4
  Background counts = 14.6
  Rate = 0.005 +/- 0.0009

[Sat Dec 24 04:46:06 2011] Off-axis axis estimate = 3.92'
[Sat Dec 24 05:54:39 2011] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 05:54:39 2011] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Dec 24 05:54:39 2011] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.678
[Sat Dec 24 05:54:39 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 8.39"
[Sat Dec 24 06:14:43 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_src5.ximg exists
[Sat Dec 24 06:14:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_src5.csv
[Sat Dec 24 06:14:43 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Dec 24 06:14:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_src5.csv
[Sat Dec 24 06:14:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 06:14:44 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Dec 24 06:14:44 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Dec 24 06:14:44 2011] Fit fullrun_mos2_xmm0501621601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Dec 24 06:14:58 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.156131 pixels away
[Sat Dec 24 06:14:58 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 06:14:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 06:14:58 2011] Assessing source extent using major
[Sat Dec 24 06:14:58 2011] Source does appear to be extended
[Sat Dec 24 06:14:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 07:16:54 2011] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 07:16:54 2011] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Dec 24 07:16:54 2011] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.678
[Sat Dec 24 07:16:54 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 8.39"
[Sat Dec 24 07:34:21 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_src5.ximg exists
[Sat Dec 24 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_src5.csv
[Sat Dec 24 07:34:21 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Dec 24 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_src5.csv
[Sat Dec 24 07:34:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 07:34:21 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Dec 24 07:34:21 2011] fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Dec 24 07:34:21 2011] Fit fullrun_mos2_xmm0501621601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Dec 24 07:34:35 2011] Spatial fit model total counts = 90.454700, observed total counts = 91.000000
[Sat Dec 24 07:34:35 2011] Offset between fit and detection position for source 6 = 0.153119 pixels
[Sat Dec 24 07:34:35 2011] 91.411800 total counts/ 57.811800 bgd. counts: snr = 4.419072
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.153119 pixels
  Position = (278.9, 247.9) = 16 59 45.40 46 58 15.4
  Extent = 5.9 (4.1-8.2)", rotation angle = 0
  Source counts = 33.6 +/- 9.6
  Background counts = 57.8
  Rate = 0.003 +/- 0.0008
[Sat Dec 24 07:34:35 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 07:34:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 07:34:35 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 07:34:35 2011] Source does appear to be extended
[Sat Dec 24 07:34:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 08:09:36 2011] XMMSAS src. selection expression = ellipse(24214.320380, 21519.628600, 351.305085, 351.305085, 0.000000, X, Y)
[Sat Dec 24 08:09:36 2011] Writing source region out to fullrun_mos2_xmm0501621601_pi300-10000_pass1_cl_src6_src.reg
[Sat Dec 24 08:09:36 2011] Extracting stamp from image fullrun_mos2_xmm0501621601_pi300-10000_cl_sm2.00.img.gz, (259, 228) - (299, 268)
[Sat Dec 24 08:09:36 2011] XMMSAS bgd. selection expression = annulus(24214.320380, 21519.628600, 585.508475, 1171.016949, X, Y)
[Sat Dec 24 08:09:36 2011] Writing fullrun_mos2_xmm0501621601_pi300-10000_pass1_cl_src6.gif
[Sat Dec 24 08:11:07 2011] Mean detx,y = (1101.88, -6341.26) 
[Sat Dec 24 08:11:09 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 08:11:25 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 08:11:26 2011] Setting source spectrum file to fullrun_mos2_xmm0501621601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Dec 24 08:11:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501621601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Dec 24 08:23:41 2011] Not generating rmf since there are only 33 counts
[Sat Dec 24 08:23:41 2011] rmf not generated due to insufficient counts
[Sat Dec 24 08:24:28 2011] Updating aperture counts using extracted products
[Sat Dec 24 08:24:28 2011] Error reading totcts from fullrun_mos2_xmm0501621601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Dec 24 08:24:28 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 08:24:28 2011] Using photon index=1.80, rate=0.00273, arf fullrun_mos2_xmm0501621601_pi300-10000_pass1_cl_src6.arf
[Sat Dec 24 08:24:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 08:24:28 2011] Updating source flux to 4.5e-14
[Sat Dec 24 08:24:44 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting