[Sat Apr  7 10:07:01 2012] Detection parameters:
  Position = (139.3, 223.1) = 17 0 36.83 46 55 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 573.0 +/- 32.4
  Background counts = 10.4
  Rate = 0.08 +/- 0.005

[Sat Apr  7 10:07:01 2012] Off-axis axis estimate = 12.76'
[Sat Apr  7 10:08:07 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 10:08:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr  7 10:08:07 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Sat Apr  7 10:08:07 2012] source mask rpix=2.9, npix_max = 47, mask sum = 44, frac = 0.927
[Sat Apr  7 10:08:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.81"
[Sat Apr  7 10:28:14 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Apr  7 10:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 10:28:15 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Apr  7 10:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 10:28:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 10:28:15 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr  7 10:28:15 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr  7 10:28:15 2012] Fit fullrun_pn_xmm0501620301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr  7 10:40:13 2012] Spatial fit model total counts = 946.221000, observed total counts = 874.000000
[Sat Apr  7 10:40:13 2012] Offset between fit and detection position for source 1 = 2.614549 pixels
[Sat Apr  7 10:40:13 2012] 912.227000 total counts/ 266.651000 bgd. counts: snr = 39.534456
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.614549 pixels
  Position = (140.0, 220.6) = 17 0 36.54 46 55 33.2
  Extent = 11.9 (11.0-12.9)", rotation angle = 0
  Source counts = 645.6 +/- 30.2
  Background counts = 266.7
  Rate = 0.09 +/- 0.004
[Sat Apr  7 10:40:13 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 10:40:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 10:40:13 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 10:40:13 2012] Source does appear to be extended
[Sat Apr  7 10:40:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 10:40:13 2012] Source is confused with source 16
[Sat Apr  7 10:40:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 10:40:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr  7 10:40:19 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Sat Apr  7 10:40:19 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.864
[Sat Apr  7 10:40:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.86"
[Sat Apr  7 11:01:52 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Apr  7 11:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 11:01:52 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Apr  7 11:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 11:01:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 11:01:53 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr  7 11:01:53 2012] fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr  7 11:01:53 2012] Fit fullrun_pn_xmm0501620301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr  7 11:12:12 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Sat Apr  7 11:12:12 2012] Spatial fit model total counts = 1011.170000, observed total counts = 915.000000
[Sat Apr  7 11:12:12 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 11:12:12 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 11:12:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 11:12:12 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 11:12:12 2012] Source does appear to be extended
[Sat Apr  7 11:12:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 11:12:18 2012] XMMSAS src. selection expression = ellipse(12132.558600, 19142.296000, 711.678020, 711.678020, 0.000000, X, Y)
[Sat Apr  7 11:12:18 2012] Writing source region out to fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1_src.reg
[Sat Apr  7 11:12:18 2012] Extracting stamp from image fullrun_pn_xmm0501620301_pi300-10000_cl_sm2.00.img.gz, (99, 180) - (181, 261)
[Sat Apr  7 11:12:18 2012] XMMSAS bgd. selection expression = annulus(12132.558600, 19142.296000, 1186.130034, 2372.260068, X, Y) && !ellipse(12265.605000, 18892.374000, 547.936016, 547.936016, 0.000000, X, Y)
[Sat Apr  7 11:12:18 2012] Writing fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1.gif
[Sat Apr  7 11:12:24 2012] Mean detx,y = (-16349.93, 77.11) 
[Sat Apr  7 11:12:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 11:12:52 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 11:12:52 2012] Setting source spectrum file to fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr  7 11:12:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Apr  7 11:39:35 2012] Updating aperture counts using extracted products
[Sat Apr  7 11:39:35 2012] Error reading totcts from fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr  7 11:39:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 11:39:35 2012] Using photon index=1.80, rate=0.0946, arf fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1.arf
[Sat Apr  7 11:39:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 11:39:35 2012] Updating source flux to 1.2e-12
[Sat Apr  7 11:39:52 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sat Apr  7 11:39:52 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Apr  7 11:40:09 2012] Reading fit data from xmm0501620301/analysis//spectral/fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Apr  7 11:40:09 2012] Spectral fit parameter nH value = 7.22188e+12
[Sat Apr  7 11:40:09 2012] Spectral fit parameter PhoIndex value = 1.77431
[Sat Apr  7 11:40:09 2012] Failed to get F(0.3-8.0) from xmm0501620301/analysis//spectral/fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Apr  7 11:40:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 11:40:09 2012] Using Nh = 7.2e+12, photon index=1.77, rate=0.0946, arf fullrun_pn_xmm0501620301_pi300-10000_pass1_cl_src1.arf
[Sat Apr  7 11:40:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 11:40:09 2012] Updating source flux to 1.2e-12