[Sat Mar 24 12:49:56 2012] Detection parameters:
  Position = (244.8, 292.2) = 5 20 32.00 6 16 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2884.8 +/- 64.3
  Background counts = 21.1
  Rate = 0.3 +/- 0.007

[Sat Mar 24 12:49:56 2012] Off-axis axis estimate = 3.91'
[Sat Mar 24 13:27:38 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 13:27:38 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Mar 24 13:27:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Sat Mar 24 13:27:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.39"
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 24 13:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Mar 24 13:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 14:11:47 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.233345 pixels away
[Sat Mar 24 14:11:47 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 14:11:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 14:11:47 2012] Assessing source extent using major
[Sat Mar 24 14:11:47 2012] Source does appear to be extended
[Sat Mar 24 14:11:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 14:45:21 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 14:45:21 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Mar 24 14:45:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Sat Mar 24 14:45:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.39"
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 24 15:07:47 2012] Fit fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 24 15:07:47 2012] Fit fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 24 15:31:44 2012] Spatial fit model total counts = 2528.190000, observed total counts = 2402.000000
[Sat Mar 24 15:31:44 2012] Offset between fit and detection position for source 2 = 0.179080 pixels
[Sat Mar 24 15:31:44 2012] 2510.519000 total counts/ 615.749000 bgd. counts: snr = 76.358017
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.179080 pixels
  Position = (244.9, 292.4) = 5 20 31.97 6 16 11.9
  Extent = 5.8" x 5.2", rotation angle = 81
  Source counts = 1894.8 +/- 50.1
  Background counts = 615.7
  Rate = 0.2 +/- 0.005
[Sat Mar 24 15:31:44 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:31:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:31:44 2012] Assessing source extent using major
[Sat Mar 24 15:31:44 2012] Source does appear to be extended
[Sat Mar 24 15:31:44 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Sat Mar 24 16:04:19 2012] Counts = 1894.770000, rescaling region sizes by 2.000000
[Sat Mar 24 16:04:19 2012] XMMSAS src. selection expression = ellipse(21256.111771, 25389.970667, 699.037071, 620.506046, 80.847408, X, Y)
[Sat Mar 24 16:04:19 2012] Writing source region out to fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 24 16:04:19 2012] Extracting stamp from image fullrun_mos1_xmm0501600101_pi300-10000_cl_sm2.00.img.gz, (205, 252) - (285, 333)
[Sat Mar 24 16:04:19 2012] XMMSAS bgd. selection expression = annulus(21256.111771, 25389.970667, 2330.123571, 4660.247143, X, Y)
[Sat Mar 24 16:04:19 2012] Writing fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2.gif
[Sat Mar 24 16:04:23 2012] Mean detx,y = (-2165.41, -5988.13) 
[Sat Mar 24 16:04:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 16:05:44 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 16:05:44 2012] Setting source spectrum file to fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 24 16:05:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 24 16:38:22 2012] Updating aperture counts using extracted products
[Sat Mar 24 16:38:22 2012] Error reading totcts from fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 24 16:38:22 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 16:38:22 2012] Using photon index=1.80, rate=0.205, arf fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2.arf
[Sat Mar 24 16:38:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 16:38:22 2012] Updating source flux to 2.8e-12
[Sat Mar 24 16:38:52 2012] Reading fit data from xmm0501600101/analysis//spectral/fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 24 16:38:52 2012] Spectral fit parameter nH value = 1.58856e+21
[Sat Mar 24 16:38:52 2012] Spectral fit parameter PhoIndex value = 3.20017
[Sat Mar 24 16:38:52 2012] Failed to get F(0.3-8.0) from xmm0501600101/analysis//spectral/fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 24 16:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 16:38:52 2012] Using Nh = 1.6e+21, photon index=3.20, rate=0.205, arf fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src2.arf
[Sat Mar 24 16:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 16:38:52 2012] Updating source flux to 2e-12