[Sat Mar 24 12:49:56 2012] Detection parameters:
  Position = (352.7, 249.1) = 5 20 0.51 6 13 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 651.6 +/- 32.5
  Background counts = 14.2
  Rate = 0.09 +/- 0.004

[Sat Mar 24 12:49:56 2012] Off-axis axis estimate = 5.32'
[Sat Mar 24 13:27:38 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 13:27:38 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Sat Mar 24 13:27:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 16, frac = 0.597
[Sat Mar 24 13:27:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.09"
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src2.csv
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src2.csv
[Sat Mar 24 13:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Mar 24 13:48:04 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Mar 24 13:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Mar 24 13:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501600101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 14:11:47 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.620498 pixels away
[Sat Mar 24 14:11:47 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 14:11:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 14:11:47 2012] Assessing source extent using major
[Sat Mar 24 14:11:47 2012] Source does appear to be extended
[Sat Mar 24 14:11:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 14:45:21 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 14:45:21 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Sat Mar 24 14:45:21 2012] source mask rpix=2.1, npix_max = 26, mask sum = 16, frac = 0.597
[Sat Mar 24 14:45:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.09"
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Mar 24 15:07:47 2012] Fit fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Mar 24 15:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Mar 24 15:07:47 2012] fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Mar 24 15:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Mar 24 15:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501600101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 15:31:44 2012] Spatial fit model total counts = 501.778000, observed total counts = 553.000000
[Sat Mar 24 15:31:44 2012] Offset between fit and detection position for source 1 = 0.213402 pixels
[Sat Mar 24 15:31:44 2012] 506.080000 total counts/ 212.730000 bgd. counts: snr = 20.112762
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.213402 pixels
  Position = (352.9, 249.0) = 5 20 0.46 6 13 3.1
  Extent = 5.0 (4.4-5.9)" x 3.3 (2.9-3.9)", rotation angle = 322 (306-336) degrees
  Source counts = 293.4 +/- 22.5
  Background counts = 212.7
  Rate = 0.03 +/- 0.002
[Sat Mar 24 15:31:44 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 15:31:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 15:31:44 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 15:31:44 2012] Source does appear to be extended
[Sat Mar 24 15:31:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Sat Mar 24 16:04:19 2012] XMMSAS src. selection expression = ellipse(30654.146040, 21613.049400, 301.180809, 199.962006, 322.425986, X, Y)
[Sat Mar 24 16:04:19 2012] Writing source region out to fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 24 16:04:19 2012] Extracting stamp from image fullrun_mos1_xmm0501600101_pi300-10000_cl_sm2.00.img.gz, (336, 232) - (370, 266)
[Sat Mar 24 16:04:19 2012] XMMSAS bgd. selection expression = annulus(30654.146040, 21613.049400, 501.968014, 1003.936029, X, Y)
[Sat Mar 24 16:04:19 2012] Writing fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src1.gif
[Sat Mar 24 16:05:50 2012] Mean detx,y = (-5466.94, 3562.49) 
[Sat Mar 24 16:05:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 16:06:02 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 16:06:02 2012] Setting source spectrum file to fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 24 16:06:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar 24 16:38:22 2012] Updating aperture counts using extracted products
[Sat Mar 24 16:38:22 2012] Error reading totcts from fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 24 16:38:22 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 16:38:22 2012] Using photon index=1.80, rate=0.0317, arf fullrun_mos1_xmm0501600101_pi300-10000_pass1_cl_src1.arf
[Sat Mar 24 16:38:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 16:38:22 2012] Updating source flux to 7.5e-13