[Mon Nov 28 03:28:42 2011] Detection parameters:
  Position = (299.8, 300.2) = 17 28 23.12 -14 17 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.5 +/- 25.7
  Background counts = 152.5
  Rate = 0.002 +/- 0.0004

[Mon Nov 28 03:28:44 2011] Off-axis axis estimate = 0.16'
[Mon Nov 28 03:43:04 2011] Using EEF radius (= 6.51 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:43:04 2011] Initial guess for spatial extent in simple fitting = 6.51"
[Mon Nov 28 03:43:04 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Mon Nov 28 03:43:04 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 6.51"
[Mon Nov 28 09:30:09 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src56.ximg exists
[Mon Nov 28 09:30:09 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src56_1.ximg exists
[Mon Nov 28 09:30:09 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src56 appears to have run properly
[Mon Nov 28 09:30:11 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Mon Nov 28 09:30:11 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Mon Nov 28 09:30:11 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Mon Nov 28 13:50:28 2011] Source 62 is offset by -5.324348 and -6.757038 pixels which is larger than
2 X fitted extent = 1.437099 x 5.986897, not incorporating fit results
[Mon Nov 28 13:50:28 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:28 2011] Assessing source extent using major
[Mon Nov 28 13:50:28 2011] Source does appear to be extended
[Mon Nov 28 13:50:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:51:21 2011] Using EEF radius (= 6.51 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:51:21 2011] Initial guess for spatial extent in simple fitting = 6.51"
[Mon Nov 28 13:51:21 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Mon Nov 28 13:51:21 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 6.51"
[Mon Nov 28 18:47:05 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src57.ximg exists
[Mon Nov 28 18:47:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src57.csv
[Mon Nov 28 18:47:05 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src57_1.ximg exists
[Mon Nov 28 18:47:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src57.csv
[Mon Nov 28 18:47:05 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 18:47:07 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Mon Nov 28 18:47:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src57.csv
[Mon Nov 28 18:47:07 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Nov 28 18:47:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src57.csv
[Mon Nov 28 18:47:07 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 21:10:50 2011] Spatial fit model total counts = 1366.050000, observed total counts = 3469.000000
[Mon Nov 28 21:10:50 2011] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Nov 28 21:10:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:10:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:10:50 2011] Assessing source extent using major
[Mon Nov 28 21:10:50 2011] Source does appear to be extended
[Mon Nov 28 21:10:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 21:11:31 2011] XMMSAS src. selection expression = ellipse(26036.201721, 26071.497681, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 21:11:31 2011] Writing source region out to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src62_src.reg
[Mon Nov 28 21:11:31 2011] Extracting stamp from image fullrun_pn_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (262, 263) - (337, 338)
[Mon Nov 28 21:11:31 2011] XMMSAS bgd. selection expression = annulus(26036.201721, 26071.497681, 1087.500000, 2175.000000, X, Y) && !ellipse(27005.114480, 27574.807400, 1458.060042, 1458.060042, 0.000000, X, Y) && !ellipse(23832.407400, 25348.299600, 493.928814, 493.928814, 0.000000, X, Y) && !ellipse(27910.448000, 29147.348000, 1311.600038, 1311.600038, 0.000000, X, Y) && !ellipse(27319.119843, 28990.890900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.046387, 28916.295197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.178000, 29299.176000, 1229.136035, 1229.136035, 0.000000, X, Y) && !ellipse(27154.715118, 25008.261993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.096000, 24288.942800, 726.883221, 726.883221, 0.000000, X, Y) && !ellipse(26391.588013, 24327.382385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.386000, 24236.209200, 436.460013, 436.460013, 0.000000, X, Y) && !ellipse(27234.007800, 23699.636000, 1247.528036, 485.850414, 83.366440, X, Y) && !ellipse(27268.709021, 23190.425351, 1247.528036, 431.005136, 84.454579, X, Y)
[Mon Nov 28 21:11:31 2011] Writing fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src62.gif
[Mon Nov 28 23:44:21 2011] Mean detx,y = (-878.98, 1254.92) 
[Mon Nov 28 23:44:29 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 23:44:55 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 23:44:56 2011] Setting source spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon Nov 28 23:44:56 2011] Setting bgd. spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Tue Nov 29 03:27:33 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 03:27:33 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:08:58 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:08:58 2011] Error reading totcts from fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Nov 29 06:09:04 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:04 2011] Using photon index=1.80, rate=0.00187, arf fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src62.arf
[Tue Nov 29 06:09:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:04 2011] Updating source flux to 4.7e-15
[Tue Nov 29 06:13:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting