[Mon Nov 28 03:28:36 2011] Detection parameters:
  Position = (439.8, 382.1) = 17 27 41.27 -14 11 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1151.6 +/- 43.8
  Background counts = 117.7
  Rate = 0.01 +/- 0.0005

[Mon Nov 28 03:28:44 2011] Off-axis axis estimate = 11.91'
[Mon Nov 28 03:43:04 2011] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:43:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 03:43:04 2011] Initial guess for spatial extent in simple fitting = 12.38"
[Mon Nov 28 03:43:04 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Mon Nov 28 03:43:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.38"
[Mon Nov 28 09:30:08 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Nov 28 09:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src2.csv
[Mon Nov 28 09:30:08 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Nov 28 09:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src2.csv
[Mon Nov 28 09:30:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 09:30:10 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Nov 28 09:30:10 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Nov 28 09:30:10 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Nov 28 13:50:28 2011] Warning, spatial fit 2 centroid is now closest to src. 48
[Mon Nov 28 13:50:28 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:28 2011] Assessing source extent using major
[Mon Nov 28 13:50:28 2011] Source does appear to be extended
[Mon Nov 28 13:50:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:51:21 2011] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:51:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 13:51:21 2011] Initial guess for spatial extent in simple fitting = 12.38"
[Mon Nov 28 13:51:21 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Mon Nov 28 13:51:21 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.38"
[Mon Nov 28 18:47:04 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Nov 28 18:47:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src2.csv
[Mon Nov 28 18:47:04 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Nov 28 18:47:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src2.csv
[Mon Nov 28 18:47:04 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 18:47:06 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Nov 28 18:47:06 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Nov 28 18:47:06 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Nov 28 21:10:49 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.188982 pixels away
[Mon Nov 28 21:10:49 2011] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.463139 pixels away
[Mon Nov 28 21:10:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:10:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:10:50 2011] Assessing source extent using major
[Mon Nov 28 21:10:50 2011] Source does appear to be extended
[Mon Nov 28 21:10:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 21:11:28 2011] Counts = 1151.634888, rescaling region sizes by 2.000000
[Mon Nov 28 21:11:28 2011] XMMSAS src. selection expression = ellipse(38210.817322, 33196.311279, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Nov 28 21:11:28 2011] Writing source region out to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src2_src.reg
[Mon Nov 28 21:11:28 2011] Extracting stamp from image fullrun_pn_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (365, 307) - (515, 457)
[Mon Nov 28 21:11:28 2011] XMMSAS bgd. selection expression = annulus(38210.817322, 33196.311279, 4350.000000, 8700.000000, X, Y) && !ellipse(30801.679291, 35386.041382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.214780, 29304.476400, 348.619210, 348.619210, 0.000000, X, Y) && !ellipse(35301.754822, 28670.245667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32544.690094, 40650.263550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37696.074000, 39818.428000, 2235.232064, 2235.232064, 0.000000, X, Y) && !ellipse(32298.252757, 29317.247794, 1496.432043, 533.030880, 0.000442, X, Y) && !ellipse(38467.845398, 28672.324554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30960.267521, 26740.449538, 564.561551, 499.905901, 112.236191, X, Y) && !ellipse(32057.921012, 32789.174844, 601.877354, 504.816505, 118.524202, X, Y) && !ellipse(32372.591095, 31372.218536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39183.888214, 31354.490906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37210.808502, 31349.491486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34442.967010, 31328.678711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30732.356380, 30576.621400, 396.464811, 396.464811, 0.000000, X, Y) && !ellipse(32183.447800, 29338.071600, 560.574416, 560.574416, 0.000000, X, Y) && !ellipse(32161.487061, 28543.637939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32796.200000, 27296.718800, 449.368813, 364.784010, -0.000000, X, Y) && !ellipse(38734.975400, 26421.942200, 352.486410, 352.486410, 0.000000, X, Y) && !ellipse(35080.630740, 26346.735400, 733.097621, 733.097621, 0.000000, X, Y) && !ellipse(30780.197449, 24488.096619, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 21:11:28 2011] Writing fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src2.gif
[Mon Nov 28 21:21:23 2011] Mean detx,y = (11647.58, -5026.21) 
[Mon Nov 28 21:21:37 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:24:02 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:24:03 2011] Setting source spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 21:24:03 2011] Setting bgd. spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Nov 29 00:39:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 00:39:19 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:08:55 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:08:55 2011] Error reading totcts from fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 06:09:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:00 2011] Using photon index=1.80, rate=0.0135, arf fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 06:09:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:00 2011] Updating source flux to 5.9e-14
[Tue Nov 29 06:13:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting