[Mon Nov 28 03:28:37 2011] Detection parameters:
  Position = (241.0, 352.5) = 17 28 40.73 -14 13 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.7 +/- 27.8
  Background counts = 128.6
  Rate = 0.004 +/- 0.0003

[Mon Nov 28 03:28:44 2011] Off-axis axis estimate = 5.72'
[Mon Nov 28 03:43:04 2011] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:43:04 2011] Initial guess for spatial extent in simple fitting = 9.29"
[Mon Nov 28 03:43:04 2011] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.648
[Mon Nov 28 03:43:04 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 9.29"
[Mon Nov 28 09:30:08 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src15.ximg exists
[Mon Nov 28 09:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src15.csv
[Mon Nov 28 09:30:08 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Nov 28 09:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src15.csv
[Mon Nov 28 09:30:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 09:30:10 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Nov 28 09:30:10 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Nov 28 09:30:10 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Nov 28 13:50:28 2011] Source 17 is offset by 8.516013 and 5.190581 pixels which is larger than
2 X fitted extent = 3.515237 x 3.515237, not incorporating fit results
[Mon Nov 28 13:50:28 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:28 2011] Assessing source extent using major
[Mon Nov 28 13:50:28 2011] Source does appear to be extended
[Mon Nov 28 13:50:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:51:21 2011] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:51:21 2011] Initial guess for spatial extent in simple fitting = 9.29"
[Mon Nov 28 13:51:21 2011] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.648
[Mon Nov 28 13:51:21 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 9.29"
[Mon Nov 28 18:47:04 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src16.ximg exists
[Mon Nov 28 18:47:04 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Nov 28 18:47:04 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Nov 28 18:47:06 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Nov 28 18:47:06 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Nov 28 18:47:06 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Nov 28 21:10:49 2011] Source 17 is offset by 7.565960 and 5.268833 pixels which is larger than
2 X fitted extent = 1.794897 x 8.541701, not incorporating fit results
[Mon Nov 28 21:10:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:10:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:10:50 2011] Assessing source extent using major
[Mon Nov 28 21:10:50 2011] Source does appear to be extended
[Mon Nov 28 21:10:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 21:10:50 2011] Source is confused with source 46
[Mon Nov 28 21:11:28 2011] XMMSAS src. selection expression = ellipse(20916.263138, 30620.842590, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 21:11:28 2011] Writing source region out to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src17_src.reg
[Mon Nov 28 21:11:28 2011] Extracting stamp from image fullrun_pn_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (203, 315) - (278, 390)
[Mon Nov 28 21:11:28 2011] XMMSAS bgd. selection expression = annulus(20916.263138, 30620.842590, 1087.500000, 2175.000000, X, Y) && !ellipse(20872.113200, 31141.286000, 1532.048044, 383.664811, 94.820780, X, Y)
[Mon Nov 28 21:11:28 2011] Writing fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src17.gif
[Mon Nov 28 22:11:19 2011] Mean detx,y = (-5695.02, -3559.17) 
[Mon Nov 28 22:11:27 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 22:12:08 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 22:12:08 2011] Setting source spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Nov 28 22:12:08 2011] Setting bgd. spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Nov 29 01:08:05 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 01:08:05 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:08:56 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:08:56 2011] Error reading totcts from fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Nov 29 06:09:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:01 2011] Using photon index=1.80, rate=0.00388, arf fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src17.arf
[Tue Nov 29 06:09:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:01 2011] Updating source flux to 1.4e-14
[Tue Nov 29 06:13:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting