[Mon Nov 28 03:28:36 2011] Detection parameters:
  Position = (311.1, 317.3) = 17 28 19.75 -14 15 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194312.2 +/- 501.8
  Background counts = 157.6
  Rate = 3 +/- 0.007

[Mon Nov 28 03:28:44 2011] Off-axis axis estimate = 1.64'
[Mon Nov 28 03:43:04 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:43:04 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Nov 28 03:43:04 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Nov 28 03:43:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Nov 28 09:30:08 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 09:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 09:30:08 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 09:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 09:30:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 09:30:10 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 09:30:10 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 09:30:10 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 13:50:28 2011] Spatial fit model total counts = 168181.000000, observed total counts = 172412.000000
[Mon Nov 28 13:50:28 2011] Offset between fit and detection position for source 1 = 0.272474 pixels
[Mon Nov 28 13:50:28 2011] 168316.000000 total counts/ 25600.000000 bgd. counts: snr = 891.975000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.272474 pixels
  Position = (311.0, 317.5) = 17 28 19.79 -14 15 54.7
  Extent = 6.1 (6.1-6.1)", rotation angle = 0
  Source counts = 142716.0 +/- 410.3
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Mon Nov 28 13:50:28 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:28 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 13:50:28 2011] Source does appear to be extended
[Mon Nov 28 13:50:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:51:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:51:21 2011] Initial guess for spatial extent in simple fitting = 6.08"
[Mon Nov 28 13:51:21 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.834
[Mon Nov 28 13:51:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.08"
[Mon Nov 28 18:47:04 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 18:47:04 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 18:47:04 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 18:47:04 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 18:47:04 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 18:47:06 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 18:47:06 2011] fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 18:47:06 2011] Fit fullrun_pn_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 21:10:49 2011] Spatial fit model total counts = 168210.000000, observed total counts = 172412.000000
[Mon Nov 28 21:10:49 2011] Offset between fit and detection position for source 1 = 0.000372 pixels
[Mon Nov 28 21:10:49 2011] 168345.000000 total counts/ 25600.000000 bgd. counts: snr = 892.156250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000372 pixels
  Position = (311.0, 317.5) = 17 28 19.79 -14 15 54.7
  Extent = 6.1 (6.1-6.1)", rotation angle = 0
  Source counts = 142745.0 +/- 410.3
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Mon Nov 28 21:10:50 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:10:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:10:50 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 21:10:50 2011] Source does appear to be extended
[Mon Nov 28 21:10:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 21:11:27 2011] Counts = 142745.000000, rescaling region sizes by 3.000000
[Mon Nov 28 21:11:27 2011] XMMSAS src. selection expression = ellipse(27005.114480, 27574.807400, 1093.545031, 1093.545031, 0.000000, X, Y)
[Mon Nov 28 21:11:27 2011] Writing source region out to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1_src.reg
[Mon Nov 28 21:11:27 2011] Extracting stamp from image fullrun_pn_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (248, 255) - (374, 380)
[Mon Nov 28 21:11:28 2011] XMMSAS bgd. selection expression = annulus(27005.114480, 27574.807400, 5467.725157, 10935.450315, X, Y) && !ellipse(38210.817322, 33196.311279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30801.679291, 35386.041382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.214780, 29304.476400, 348.619210, 348.619210, 0.000000, X, Y) && !ellipse(35301.754822, 28670.245667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26106.685000, 20989.969000, 441.008813, 441.008813, 0.000000, X, Y) && !ellipse(25064.139740, 19948.713379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.875824, 18986.063477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37696.074000, 39818.428000, 2235.232064, 2235.232064, 0.000000, X, Y) && !ellipse(16574.476471, 35548.197296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20916.263138, 30620.842590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32298.252757, 29317.247794, 1496.432043, 533.030880, 0.000442, X, Y) && !ellipse(38467.845398, 28672.324554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30960.267521, 26740.449538, 564.561551, 499.905901, 112.236191, X, Y) && !ellipse(23832.407400, 25348.299600, 493.928814, 493.928814, 0.000000, X, Y) && !ellipse(20077.729000, 23581.139800, 1025.728030, 1025.728030, 0.000000, X, Y) && !ellipse(27336.482199, 22119.683100, 1302.864037, 418.599824, 264.069553, X, Y) && !ellipse(27383.429200, 21343.947420, 951.064027, 951.064027, 0.000000, X, Y) && !ellipse(27452.177528, 20092.380240, 1421.632041, 457.306022, 90.000000, X, Y) && !ellipse(35817.597809, 19962.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.573600, 19306.992000, 1421.632041, 507.657615, 90.000000, X, Y) && !ellipse(27489.686200, 19165.518000, 981.936028, 981.936028, 0.000000, X, Y) && !ellipse(35322.413605, 18126.674301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27610.223780, 17930.743600, 626.224018, 626.224018, 0.000000, X, Y) && !ellipse(26908.830280, 17561.017200, 515.666415, 515.666415, 0.000000, X, Y) && !ellipse(27610.431100, 17583.727000, 631.351218, 631.351218, 0.000000, X, Y) && !ellipse(27667.521200, 16927.281800, 604.151217, 604.151217, 0.000000, X, Y) && !ellipse(27688.014960, 16487.920000, 426.326412, 426.326412, 0.000000, X, Y) && !ellipse(28107.565308, 37639.879822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27473.586792, 36796.589417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32057.921012, 32789.174844, 601.877354, 504.816505, 118.524202, X, Y) && !ellipse(27916.368683, 32833.737823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20872.113200, 31141.286000, 1532.048044, 383.664811, 94.820780, X, Y) && !ellipse(32372.591095, 31372.218536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37210.808502, 31349.491486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34442.967010, 31328.678711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30732.356380, 30576.621400, 396.464811, 396.464811, 0.000000, X, Y) && !ellipse(28154.976166, 29522.151642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32183.447800, 29338.071600, 560.574416, 560.574416, 0.000000, X, Y) && !ellipse(27910.448000, 29147.348000, 1311.600038, 1311.600038, 0.000000, X, Y) && !ellipse(27319.119843, 28990.890900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.046387, 28916.295197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.178000, 29299.176000, 1229.136035, 1229.136035, 0.000000, X, Y) && !ellipse(32161.487061, 28543.637939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32796.200000, 27296.718800, 449.368813, 364.784010, -0.000000, X, Y) && !ellipse(35080.630740, 26346.735400, 733.097621, 733.097621, 0.000000, X, Y) && !ellipse(26036.201721, 26071.497681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.715118, 25008.261993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30780.197449, 24488.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.096000, 24288.942800, 726.883221, 726.883221, 0.000000, X, Y) && !ellipse(19867.207140, 24392.551400, 415.863212, 415.863212, 0.000000, X, Y) && !ellipse(26391.588013, 24327.382385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.386000, 24236.209200, 436.460013, 436.460013, 0.000000, X, Y) && !ellipse(27234.007800, 23699.636000, 1247.528036, 485.850414, 83.366440, X, Y) && !ellipse(27268.709021, 23190.425351, 1247.528036, 431.005136, 84.454579, X, Y) && !ellipse(27278.614716, 22927.334991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31200.947300, 22365.445400, 688.141620, 688.141620, 0.000000, X, Y) && !ellipse(37650.369843, 21544.112518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24497.371600, 21295.973600, 1357.592039, 1357.592039, 0.000000, X, Y) && !ellipse(31129.400200, 21224.483600, 545.588016, 545.588016, 0.000000, X, Y) && !ellipse(27470.677600, 19706.790400, 1929.008056, 354.972810, 90.000000, X, Y)
[Mon Nov 28 21:11:28 2011] Writing fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1.gif
[Mon Nov 28 21:13:39 2011] Mean detx,y = (131.95, -106.06) 
[Mon Nov 28 21:14:07 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 21:19:57 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 21:19:58 2011] Setting source spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Nov 28 21:19:58 2011] Setting bgd. spectrum file to fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 06:08:55 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:08:55 2011] Error reading totcts from fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 06:09:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:00 2011] Using photon index=1.80, rate=1.68, arf fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 06:09:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:00 2011] Updating source flux to 3.7e-12
[Tue Nov 29 06:23:31 2011] Reading fit data from xmm0501580201/analysis//spectral/fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Nov 29 06:23:31 2011] Spectral fit parameter nH value = 2.30419e+21
[Tue Nov 29 06:23:31 2011] Spectral fit parameter PhoIndex value = 2.42322
[Tue Nov 29 06:23:31 2011] Failed to get F(0.3-8.0) from xmm0501580201/analysis//spectral/fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 06:23:31 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:23:31 2011] Using Nh = 2.3e+21, photon index=2.42, rate=1.68, arf fullrun_pn_xmm0501580201_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 06:23:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:23:31 2011] Updating source flux to 4.1e-12