[Mon Nov 28 03:30:56 2011] Detection parameters:
  Position = (250.0, 462.9) = 17 28 38.02 -14 5 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.1 +/- 19.9
  Background counts = 31.9
  Rate = 0.003 +/- 0.0002

[Mon Nov 28 03:30:59 2011] Off-axis axis estimate = 12.43'
[Mon Nov 28 11:19:38 2011] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:19:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 11:19:38 2011] Initial guess for spatial extent in simple fitting = 12.64"
[Mon Nov 28 11:19:38 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Mon Nov 28 11:19:38 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 12.64"
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src10.ximg exists
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Nov 28 13:49:57 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src10 appears to have run properly
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Nov 28 13:49:57 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Nov 28 13:50:53 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.564707 pixels away
[Mon Nov 28 13:50:54 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:54 2011] Assessing source extent using major
[Mon Nov 28 13:50:54 2011] Source does appear to be extended
[Mon Nov 28 13:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:38:54 2011] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:38:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 19:38:54 2011] Initial guess for spatial extent in simple fitting = 12.64"
[Mon Nov 28 19:38:54 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.905
[Mon Nov 28 19:38:54 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 12.64"
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src10.ximg exists
[Mon Nov 28 21:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src10.csv
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Nov 28 21:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src10.csv
[Mon Nov 28 21:10:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Nov 28 21:10:24 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Nov 28 21:11:05 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.564707 pixels away
[Mon Nov 28 21:11:05 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:11:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:11:05 2011] Assessing source extent using major
[Mon Nov 28 21:11:05 2011] Source does appear to be extended
[Mon Nov 28 21:11:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:02:01 2011] XMMSAS src. selection expression = ellipse(21701.501328, 40219.580627, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing source region out to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src6_src.reg
[Tue Nov 29 05:02:01 2011] Extracting stamp from image fullrun_mos2_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (213, 425) - (288, 500)
[Tue Nov 29 05:02:01 2011] XMMSAS bgd. selection expression = annulus(21701.501328, 40219.580627, 1087.500000, 2175.000000, X, Y) && !ellipse(19774.842148, 41431.335999, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src6.gif
[Tue Nov 29 05:14:38 2011] Mean detx,y = (4665.96, 12885.48) 
[Tue Nov 29 05:14:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:14:57 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:14:57 2011] Setting source spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Nov 29 05:14:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Nov 29 05:48:16 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 05:48:16 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:09:08 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:09:08 2011] Error reading totcts from fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Nov 29 06:09:09 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:09 2011] Using photon index=1.80, rate=0.00257, arf fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src6.arf
[Tue Nov 29 06:09:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:09 2011] Updating source flux to 6.8e-14
[Tue Nov 29 06:11:06 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting