[Mon Nov 28 03:30:58 2011] Detection parameters:
  Position = (331.2, 143.2) = 17 28 13.74 -14 28 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.2 +/- 15.8
  Background counts = 40.8
  Rate = 0.001 +/- 0.0002

[Mon Nov 28 03:30:59 2011] Off-axis axis estimate = 11.50'
[Mon Nov 28 11:19:38 2011] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:19:38 2011] Initial guess for spatial extent in simple fitting = 12.18"
[Mon Nov 28 11:19:38 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.826
[Mon Nov 28 11:19:38 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 12.18"
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src25.ximg exists
[Mon Nov 28 13:49:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src25.csv
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Nov 28 13:49:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src25.csv
[Mon Nov 28 13:49:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:49:58 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Nov 28 13:49:58 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Nov 28 13:49:58 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Nov 28 13:50:53 2011] Warning, spatial fit 25 centroid is now closest to src. 24
[Mon Nov 28 13:50:53 2011] Source 25 is offset by 9.180041 and -0.794126 pixels which is larger than
2 X fitted extent = 1.435899 x 1.435899, not incorporating fit results
[Mon Nov 28 13:50:54 2011] Spatial fit model total counts = 820.804000, observed total counts = 821.000000
[Mon Nov 28 13:50:54 2011] Offset between fit and detection position for source 25 = 2.269204 pixels
[Mon Nov 28 13:50:54 2011] Warning, changing simple spatial fit ID from 25 to 35
[Mon Nov 28 13:50:54 2011] 794.048000 total counts/ 528.205000 bgd. counts: snr = 11.567086
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.269204 pixels
  Position = (328.9, 143.3) = 17 28 14.42 -14 28 32.5
  Extent = 24.5 (23.9-24.8)", rotation angle = 0
  Source counts = 265.8 +/- 28.2
  Background counts = 528.2
  Rate = 0.003 +/- 0.0003
[Mon Nov 28 13:50:54 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:54 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 13:50:54 2011] Source does appear to be extended
[Mon Nov 28 13:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:50:54 2011] Source is confused with source 24
[Mon Nov 28 19:38:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:38:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 19:38:54 2011] Initial guess for spatial extent in simple fitting = 24.51"
[Mon Nov 28 19:38:54 2011] source mask rpix=5.6, npix_max = 150, mask sum = 144, frac = 0.957
[Mon Nov 28 19:38:54 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 24.51"
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src23.ximg exists
[Mon Nov 28 21:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src23.csv
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Nov 28 21:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src23.csv
[Mon Nov 28 21:10:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Nov 28 21:10:24 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Nov 28 21:11:05 2011] Warning, spatial fit 23 centroid is now closest to src. 23
[Mon Nov 28 21:11:05 2011] Spatial fit model total counts = 821.448000, observed total counts = 819.000000
[Mon Nov 28 21:11:05 2011] Offset between fit and detection position for source 25 = 1.740455 pixels
[Mon Nov 28 21:11:05 2011] Warning, changing simple spatial fit ID from 23 to 27
[Mon Nov 28 21:11:05 2011] 801.523000 total counts/ 498.818000 bgd. counts: snr = 13.553409
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.740455 pixels
  Position = (329.0, 141.6) = 17 28 14.40 -14 28 40.1
  Extent = 23.8 (23.7-47.6)", rotation angle = 0
  Source counts = 302.7 +/- 28.3
  Background counts = 498.8
  Rate = 0.003 +/- 0.0003
[Mon Nov 28 21:11:05 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:11:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:11:05 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 21:11:05 2011] Source does appear to be extended
[Mon Nov 28 21:11:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:02:01 2011] XMMSAS src. selection expression = ellipse(28571.022400, 12267.802000, 1426.794041, 1426.794041, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing source region out to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src25_src.reg
[Tue Nov 29 05:02:01 2011] Extracting stamp from image fullrun_mos2_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (247, 60) - (411, 224)
[Tue Nov 29 05:02:01 2011] XMMSAS bgd. selection expression = annulus(28571.022400, 12267.802000, 2377.990068, 4755.980137, X, Y) && !ellipse(28427.452000, 12570.340600, 1948.192056, 1948.192056, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src25.gif
[Tue Nov 29 05:20:37 2011] Mean detx,y = (-789.75, -15341.40) 
[Tue Nov 29 05:20:38 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:22:09 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:22:09 2011] Setting source spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Nov 29 05:22:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Nov 29 06:09:08 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:09:08 2011] Error reading totcts from fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Nov 29 06:09:09 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:09 2011] Using photon index=1.80, rate=0.00347, arf fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src25.arf
[Tue Nov 29 06:09:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:09 2011] Updating source flux to 7.3e-14
[Tue Nov 29 06:11:06 2011] Flag b found in src. 25 procflags, skipping spectral fitting
[Tue Nov 29 06:11:06 2011] Flag c found in src. 25 procflags, skipping spectral fitting