[Mon Nov 28 03:30:57 2011] Detection parameters:
  Position = (174.0, 214.6) = 17 29 0.80 -14 23 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.8 +/- 13.0
  Background counts = 30.7
  Rate = 0.0008 +/- 0.0001

[Mon Nov 28 03:30:59 2011] Off-axis axis estimate = 10.88'
[Mon Nov 28 11:19:38 2011] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:19:38 2011] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Nov 28 11:19:38 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.007
[Mon Nov 28 11:19:38 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 11.87"
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src29.ximg exists
[Mon Nov 28 13:49:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src29.csv
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Nov 28 13:49:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src29.csv
[Mon Nov 28 13:49:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:49:58 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Nov 28 13:49:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Nov 28 13:49:58 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Nov 28 13:49:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Nov 28 13:49:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:50:53 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.195535 pixels away
[Mon Nov 28 13:50:54 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:54 2011] Assessing source extent using major
[Mon Nov 28 13:50:54 2011] Source does appear to be extended
[Mon Nov 28 13:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:38:54 2011] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:38:54 2011] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Nov 28 19:38:54 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.007
[Mon Nov 28 19:38:54 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 11.87"
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src26.ximg exists
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Nov 28 21:10:24 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Nov 28 21:10:24 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Nov 28 21:11:05 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.470339 pixels away
[Mon Nov 28 21:11:05 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:11:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:11:05 2011] Assessing source extent using major
[Mon Nov 28 21:11:05 2011] Source does appear to be extended
[Mon Nov 28 21:11:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:02:01 2011] XMMSAS src. selection expression = ellipse(15087.175522, 18622.248795, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing source region out to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src20_src.reg
[Tue Nov 29 05:02:01 2011] Extracting stamp from image fullrun_mos2_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (136, 177) - (211, 252)
[Tue Nov 29 05:02:01 2011] XMMSAS bgd. selection expression = annulus(15087.175522, 18622.248795, 1087.500000, 2175.000000, X, Y) && !ellipse(12750.331573, 21189.027573, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src20.gif
[Tue Nov 29 05:23:18 2011] Mean detx,y = (12373.88, -8363.80) 
[Tue Nov 29 05:23:20 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:23:43 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:23:44 2011] Setting source spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Nov 29 05:23:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Nov 29 06:05:40 2011] Not generating rmf since there are only 73 counts
[Tue Nov 29 06:05:40 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:09:08 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:09:08 2011] Error reading totcts from fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Nov 29 06:09:09 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:09 2011] Using photon index=1.80, rate=0.000847, arf fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src20.arf
[Tue Nov 29 06:09:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:09 2011] Updating source flux to 2.3e-14
[Tue Nov 29 06:11:06 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting