[Mon Nov 28 03:30:56 2011] Detection parameters:
  Position = (311.1, 317.2) = 17 28 19.76 -14 15 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68529.1 +/- 306.9
  Background counts = 56.2
  Rate = 0.8 +/- 0.004

[Mon Nov 28 03:30:59 2011] Off-axis axis estimate = 1.64'
[Mon Nov 28 11:19:38 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 11:19:38 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Nov 28 11:19:38 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Nov 28 11:19:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 13:49:57 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 13:49:57 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 13:49:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 13:49:57 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 13:49:57 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 13:50:53 2011] Spatial fit model total counts = 60319.900000, observed total counts = 60304.000000
[Mon Nov 28 13:50:53 2011] Offset between fit and detection position for source 1 = 0.255722 pixels
[Mon Nov 28 13:50:53 2011] 60130.000000 total counts/ 11562.200000 bgd. counts: snr = 451.677225
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.255722 pixels
  Position = (310.9, 317.4) = 17 28 19.82 -14 15 55.1
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 48567.8 +/- 245.2
  Background counts = 11562.2
  Rate = 0.6 +/- 0.003
[Mon Nov 28 13:50:54 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:54 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 13:50:54 2011] Source does appear to be extended
[Mon Nov 28 13:50:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 19:38:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 19:38:54 2011] Initial guess for spatial extent in simple fitting = 5.52"
[Mon Nov 28 19:38:54 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.959
[Mon Nov 28 19:38:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.52"
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 21:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 21:10:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 21:10:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 21:10:24 2011] fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 21:10:24 2011] Fit fullrun_mos2_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 21:11:05 2011] Spatial fit model total counts = 60550.700000, observed total counts = 60551.000000
[Mon Nov 28 21:11:05 2011] Offset between fit and detection position for source 1 = 0.019903 pixels
[Mon Nov 28 21:11:05 2011] 60688.800000 total counts/ 12653.300000 bgd. counts: snr = 427.031993
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019903 pixels
  Position = (310.9, 317.4) = 17 28 19.83 -14 15 55.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 48035.5 +/- 246.4
  Background counts = 12653.3
  Rate = 0.6 +/- 0.003
[Mon Nov 28 21:11:05 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:11:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:11:05 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 21:11:05 2011] Source does appear to be extended
[Mon Nov 28 21:11:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:02:01 2011] Counts = 48035.500000, rescaling region sizes by 3.000000
[Tue Nov 29 05:02:01 2011] XMMSAS src. selection expression = ellipse(26995.483600, 27567.171600, 977.594428, 977.594428, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing source region out to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1_src.reg
[Tue Nov 29 05:02:01 2011] Extracting stamp from image fullrun_mos2_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (255, 261) - (367, 374)
[Tue Nov 29 05:02:01 2011] XMMSAS bgd. selection expression = annulus(26995.483600, 27567.171600, 4887.972141, 9775.944281, X, Y) && !ellipse(35260.962952, 29093.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30779.938400, 35427.638180, 444.675213, 444.675213, 0.000000, X, Y) && !ellipse(31420.824158, 18939.522141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.421640, 17538.077800, 427.596812, 427.596812, 0.000000, X, Y) && !ellipse(35847.293400, 19965.406400, 504.040217, 504.040217, 0.000000, X, Y) && !ellipse(25230.198547, 20020.768219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.388763, 27008.707092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23837.022369, 25318.669434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.997345, 27432.449768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27755.558868, 28226.077850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20179.745400, 23548.709600, 1443.528042, 612.369618, 79.618600, X, Y) && !ellipse(27934.645905, 27869.518036, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 05:02:01 2011] Writing fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1.gif
[Tue Nov 29 05:02:23 2011] Mean detx,y = (34.37, -39.38) 
[Tue Nov 29 05:02:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:08:19 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:08:20 2011] Setting source spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 05:08:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 06:09:07 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:09:07 2011] Error reading totcts from fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 06:09:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:08 2011] Using photon index=1.80, rate=0.551, arf fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 06:09:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:08 2011] Updating source flux to 5.4e-12
[Tue Nov 29 06:13:19 2011] Reading fit data from xmm0501580201/analysis//spectral/fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Nov 29 06:13:19 2011] Spectral fit parameter nH value = 2.13884e+21
[Tue Nov 29 06:13:19 2011] Spectral fit parameter PhoIndex value = 2.34841
[Tue Nov 29 06:13:19 2011] Failed to get F(0.3-8.0) from xmm0501580201/analysis//spectral/fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 06:13:19 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:13:19 2011] Using Nh = 2.1e+21, photon index=2.35, rate=0.551, arf fullrun_mos2_xmm0501580201_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 06:13:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:13:19 2011] Updating source flux to 5.1e-12