[Mon Nov 28 03:29:45 2011] Detection parameters:
  Position = (155.3, 312.9) = 17 29 6.36 -14 16 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.4 +/- 23.7
  Background counts = 33.6
  Rate = 0.004 +/- 0.0003

[Mon Nov 28 03:29:46 2011] Off-axis axis estimate = 10.43'
[Mon Nov 28 09:30:12 2011] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 09:30:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 09:30:12 2011] Initial guess for spatial extent in simple fitting = 11.64"
[Mon Nov 28 09:30:12 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.041
[Mon Nov 28 09:30:12 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 11.64"
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src5.ximg exists
[Mon Nov 28 11:19:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src5.csv
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Nov 28 11:19:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src5.csv
[Mon Nov 28 11:19:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Nov 28 11:19:37 2011] Fit fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Nov 28 13:50:40 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.479154 pixels away
[Mon Nov 28 13:50:40 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:40 2011] Assessing source extent using major
[Mon Nov 28 13:50:40 2011] Source does appear to be extended
[Mon Nov 28 13:50:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 18:47:08 2011] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 18:47:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 18:47:08 2011] Initial guess for spatial extent in simple fitting = 11.64"
[Mon Nov 28 18:47:08 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.041
[Mon Nov 28 18:47:08 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 11.64"
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src5.ximg exists
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Nov 28 19:38:54 2011] Fit fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Nov 28 19:38:54 2011] Fit fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Nov 28 21:10:56 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.998476 pixels away
[Mon Nov 28 21:10:56 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:10:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:10:56 2011] Assessing source extent using major
[Mon Nov 28 21:10:56 2011] Source does appear to be extended
[Mon Nov 28 21:10:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:10:37 2011] XMMSAS src. selection expression = ellipse(13466.264206, 27170.573608, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:10:37 2011] Writing source region out to fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src2_src.reg
[Tue Nov 29 04:10:37 2011] Extracting stamp from image fullrun_mos1_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (118, 275) - (193, 350)
[Tue Nov 29 04:10:37 2011] XMMSAS bgd. selection expression = annulus(13466.264206, 27170.573608, 1087.500000, 2175.000000, X, Y)
[Tue Nov 29 04:10:37 2011] Writing fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src2.gif
[Tue Nov 29 04:18:34 2011] Mean detx,y = (544.30, -13693.74) 
[Tue Nov 29 04:18:37 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 04:18:55 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 04:18:55 2011] Setting source spectrum file to fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 04:18:55 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Nov 29 04:40:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 04:40:19 2011] rmf not generated due to insufficient counts
[Tue Nov 29 06:09:06 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:09:06 2011] Error reading totcts from fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Nov 29 06:09:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:06 2011] Using photon index=1.80, rate=0.00388, arf fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src2.arf
[Tue Nov 29 06:09:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:06 2011] Updating source flux to 1e-13
[Tue Nov 29 06:09:13 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting