[Mon Nov 28 03:29:45 2011] Detection parameters:
  Position = (311.1, 317.2) = 17 28 19.76 -14 15 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69590.4 +/- 317.7
  Background counts = 44.9
  Rate = 0.8 +/- 0.004

[Mon Nov 28 03:29:46 2011] Off-axis axis estimate = 1.64'
[Mon Nov 28 09:30:12 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 09:30:12 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Nov 28 09:30:12 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Nov 28 09:30:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 11:19:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 11:19:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 11:19:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 11:19:37 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 11:19:37 2011] Fit fullrun_mos1_xmm0501580201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 13:50:40 2011] Spatial fit model total counts = 60564.100000, observed total counts = 60564.000000
[Mon Nov 28 13:50:40 2011] Offset between fit and detection position for source 1 = 0.256780 pixels
[Mon Nov 28 13:50:40 2011] 60624.100000 total counts/ 12924.800000 bgd. counts: snr = 419.565809
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.256780 pixels
  Position = (310.9, 317.4) = 17 28 19.81 -14 15 55.1
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 47699.3 +/- 246.2
  Background counts = 12924.8
  Rate = 0.5 +/- 0.003
[Mon Nov 28 13:50:40 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 13:50:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 13:50:40 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 13:50:40 2011] Source does appear to be extended
[Mon Nov 28 13:50:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 18:47:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 18:47:08 2011] Initial guess for spatial extent in simple fitting = 5.46"
[Mon Nov 28 18:47:08 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.975
[Mon Nov 28 18:47:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 19:38:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 19:38:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 19:38:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 19:38:54 2011] fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 19:38:54 2011] Fit fullrun_mos1_xmm0501580201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 21:10:56 2011] Spatial fit model total counts = 60472.800000, observed total counts = 60457.000000
[Mon Nov 28 21:10:56 2011] Offset between fit and detection position for source 1 = 0.012721 pixels
[Mon Nov 28 21:10:56 2011] 60779.300000 total counts/ 13459.100000 bgd. counts: snr = 407.885777
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012721 pixels
  Position = (310.9, 317.4) = 17 28 19.82 -14 15 55.1
  Extent = 5.4 (5.4-5.4)", rotation angle = 0
  Source counts = 47320.2 +/- 246.5
  Background counts = 13459.1
  Rate = 0.5 +/- 0.003
[Mon Nov 28 21:10:56 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 21:10:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 21:10:56 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 21:10:56 2011] Source does appear to be extended
[Mon Nov 28 21:10:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:10:36 2011] Counts = 47320.200000, rescaling region sizes by 3.000000
[Tue Nov 29 04:10:36 2011] XMMSAS src. selection expression = ellipse(26997.626400, 27566.744000, 970.992028, 970.992028, 0.000000, X, Y)
[Tue Nov 29 04:10:36 2011] Writing source region out to fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1_src.reg
[Tue Nov 29 04:10:36 2011] Extracting stamp from image fullrun_mos1_xmm0501580201_pi300-10000_cl_sm2.00.img.gz, (255, 262) - (367, 373)
[Tue Nov 29 04:10:36 2011] XMMSAS bgd. selection expression = annulus(26997.626400, 27566.744000, 4854.960140, 9709.920279, X, Y) && !ellipse(35269.737823, 29100.328552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30789.349000, 35417.059600, 567.164816, 567.164816, 0.000000, X, Y) && !ellipse(35803.162415, 19970.515152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30459.005800, 24978.518200, 459.247213, 459.247213, 0.000000, X, Y) && !ellipse(20106.743378, 23518.225037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25920.280000, 24250.060400, 1137.360033, 430.599212, 0.000000, X, Y) && !ellipse(24768.443817, 27436.652679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28022.244215, 30597.218752, 1265.168036, 547.086376, 359.433631, X, Y)
[Tue Nov 29 04:10:36 2011] Writing fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1.gif
[Tue Nov 29 04:10:57 2011] Mean detx,y = (176.87, -190.24) 
[Tue Nov 29 04:11:01 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 04:14:14 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 04:14:14 2011] Setting source spectrum file to fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 04:14:14 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 06:09:05 2011] Updating aperture counts using extracted products
[Tue Nov 29 06:09:05 2011] Error reading totcts from fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 06:09:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:09:06 2011] Using photon index=1.80, rate=0.543, arf fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 06:09:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:09:06 2011] Updating source flux to 4.9e-12
[Tue Nov 29 06:11:06 2011] Reading fit data from xmm0501580201/analysis//spectral/fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Nov 29 06:11:06 2011] Spectral fit parameter nH value = 2.04645e+21
[Tue Nov 29 06:11:06 2011] Spectral fit parameter PhoIndex value = 2.3348
[Tue Nov 29 06:11:06 2011] Failed to get F(0.3-8.0) from xmm0501580201/analysis//spectral/fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 06:11:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 06:11:06 2011] Using Nh = 2e+21, photon index=2.33, rate=0.543, arf fullrun_mos1_xmm0501580201_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 06:11:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 06:11:06 2011] Updating source flux to 4.6e-12