[Mon Feb 13 00:06:51 2012] Detection parameters:
  Position = (281.4, 242.4) = 17 28 28.56 -14 21 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.6 +/- 19.7
  Background counts = 150.3
  Rate = 0.002 +/- 0.0003

[Mon Feb 13 00:06:51 2012] Off-axis axis estimate = 4.24'
[Mon Feb 13 00:12:41 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 00:12:41 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Mon Feb 13 00:12:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Mon Feb 13 00:12:41 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 8.55"
[Mon Feb 13 02:42:44 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src83.ximg exists
[Mon Feb 13 02:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src83.csv
[Mon Feb 13 02:42:44 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src83_1.ximg exists
[Mon Feb 13 02:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src83.csv
[Mon Feb 13 02:42:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 02:42:46 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Mon Feb 13 02:42:46 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Mon Feb 13 02:42:46 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Mon Feb 13 05:22:33 2012] Spatial fit model total counts = 1366.000000, observed total counts = 1366.000000
[Mon Feb 13 05:22:33 2012] Offset between fit and detection position for source 87 = 3.750885 pixels
[Mon Feb 13 05:22:33 2012] 1294.009000 total counts/ 726.308000 bgd. counts: snr = 21.064892
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 3.750885 pixels
  Position = (281.7, 246.2) = 17 28 28.47 -14 21 5.1
  Extent = 17.1 (17.0-34.2)", rotation angle = 0
  Source counts = 567.7 +/- 36.0
  Background counts = 726.3
  Rate = 0.006 +/- 0.0004
[Mon Feb 13 05:22:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:33 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:22:33 2012] Source does appear to be extended
[Mon Feb 13 05:22:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 05:22:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 05:22:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 05:22:53 2012] Initial guess for spatial extent in simple fitting = 17.10"
[Mon Feb 13 05:22:53 2012] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.031
[Mon Feb 13 05:22:53 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 17.10"
[Mon Feb 13 07:15:29 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src76.ximg exists
[Mon Feb 13 07:15:29 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src76_1.ximg exists
[Mon Feb 13 07:15:29 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src76 appears to have run properly
[Mon Feb 13 07:15:30 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Mon Feb 13 07:15:30 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Mon Feb 13 07:15:30 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Mon Feb 13 10:17:12 2012] Spatial fit model total counts = 2468.470000, observed total counts = 2464.000000
[Mon Feb 13 10:17:12 2012] Offset between fit and detection position for source 87 = 2.302256 pixels
[Mon Feb 13 10:17:12 2012] 2461.677000 total counts/ 1529.650000 bgd. counts: snr = 23.830462
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 2.302256 pixels
  Position = (280.0, 244.5) = 17 28 28.95 -14 21 12.2
  Extent = 34.2 (33.9-68.4)" x 15.8 (14.4-17.5)", rotation angle = 90 (90-90) degrees
  Source counts = 932.0 +/- 49.6
  Background counts = 1529.7
  Rate = 0.01 +/- 0.0006
[Mon Feb 13 10:17:12 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:12 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:12 2012] Source does appear to be extended
[Mon Feb 13 10:17:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.94
[Mon Feb 13 10:17:12 2012] Source is asymmetric
[Mon Feb 13 10:17:12 2012] Source is confused with source 88
[Mon Feb 13 10:17:49 2012] XMMSAS src. selection expression = ellipse(24315.721000, 21225.996000, 2052.216059, 945.096027, 90.000000, X, Y)
[Mon Feb 13 10:17:49 2012] Writing source region out to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src87_src.reg
[Mon Feb 13 10:17:49 2012] Extracting stamp from image fullrun_pn_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (162, 127) - (398, 362)
[Mon Feb 13 10:17:50 2012] XMMSAS bgd. selection expression = annulus(24315.721000, 21225.996000, 3420.360098, 6840.720197, X, Y) && !ellipse(26984.752000, 27556.276600, 1558.332045, 1558.332045, 0.000000, X, Y) && !ellipse(30946.368200, 26721.199800, 480.096014, 480.096014, 0.000000, X, Y) && !ellipse(27936.432800, 13650.664000, 775.858422, 775.858422, 0.000000, X, Y) && !ellipse(30794.454956, 21273.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.889180, 25306.943800, 411.351212, 411.351212, 0.000000, X, Y) && !ellipse(27191.641020, 24567.574000, 1521.296044, 405.300012, 86.866130, X, Y) && !ellipse(27197.565200, 24808.010000, 927.560027, 927.560027, 0.000000, X, Y) && !ellipse(30741.744659, 24493.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19866.439340, 24385.390060, 448.304813, 448.304813, 0.000000, X, Y) && !ellipse(27207.844200, 24216.947200, 737.041621, 737.041621, 0.000000, X, Y) && !ellipse(25780.616180, 24204.548500, 464.552813, 464.552813, 0.000000, X, Y) && !ellipse(20084.220764, 23458.473602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.218690, 23448.900000, 588.058417, 588.058417, 0.000000, X, Y) && !ellipse(27266.951240, 23102.400800, 764.286422, 764.286422, 0.000000, X, Y) && !ellipse(27334.529633, 22051.341263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.175340, 20687.088000, 654.483219, 654.483219, 0.000000, X, Y) && !ellipse(27466.026800, 20340.674000, 865.240025, 865.240025, 0.000000, X, Y) && !ellipse(27508.076600, 19840.010000, 501.143214, 501.143214, 0.000000, X, Y) && !ellipse(31372.091095, 18943.682571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.174000, 18854.407600, 793.652823, 793.652823, 0.000000, X, Y) && !ellipse(27586.125519, 18307.848190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.090363, 17696.267502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.569366, 16655.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.668400, 15962.190620, 849.376024, 849.376024, 0.000000, X, Y) && !ellipse(27822.043457, 15085.087341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27842.209600, 14785.597800, 702.701620, 702.701620, 0.000000, X, Y) && !ellipse(25275.248360, 14330.168600, 536.216815, 536.216815, 0.000000, X, Y) && !ellipse(16465.012750, 28466.882387, 1493.088043, 392.416740, 106.540802, X, Y) && !ellipse(17142.526200, 24539.296600, 720.895221, 720.895221, 0.000000, X, Y) && !ellipse(26354.696381, 24308.677704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16843.377838, 23756.442230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31194.377320, 22361.165800, 552.686416, 552.686416, 0.000000, X, Y) && !ellipse(25794.033844, 20174.203690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25741.250400, 18272.408000, 560.310416, 560.310416, 0.000000, X, Y)
[Mon Feb 13 10:17:50 2012] Writing fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src87.gif
[Mon Feb 13 12:11:27 2012] Mean detx,y = (-2981.99, 6068.76) 
[Mon Feb 13 12:11:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 12:13:20 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 12:13:20 2012] Setting source spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Mon Feb 13 12:13:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Mon Feb 13 16:22:05 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:05 2012] Error reading totcts from fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Mon Feb 13 16:22:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:07 2012] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src87.arf
[Mon Feb 13 16:22:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:07 2012] Updating source flux to 3.5e-14
[Mon Feb 13 16:25:12 2012] Flag c found in src. 87 procflags, skipping spectral fitting