[Mon Feb 13 00:06:50 2012] Detection parameters:
  Position = (274.2, 291.3) = 17 28 30.70 -14 17 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 511.3 +/- 32.8
  Background counts = 159.2
  Rate = 0.008 +/- 0.0005

[Mon Feb 13 00:06:51 2012] Off-axis axis estimate = 1.83'
[Mon Feb 13 00:12:41 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 00:12:41 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Feb 13 00:12:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Mon Feb 13 00:12:41 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.34"
[Mon Feb 13 02:42:44 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src30.ximg exists
[Mon Feb 13 02:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src30.csv
[Mon Feb 13 02:42:44 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Feb 13 02:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src30.csv
[Mon Feb 13 02:42:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 02:42:45 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Feb 13 02:42:45 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Feb 13 02:42:45 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Feb 13 05:22:33 2012] Source 32 is offset by -6.544927 and -7.411870 pixels which is larger than
2 X fitted extent = 6.752874 x 6.752874, not incorporating fit results
[Mon Feb 13 05:22:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:33 2012] Assessing source extent using major
[Mon Feb 13 05:22:33 2012] Source does appear to be extended
[Mon Feb 13 05:22:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 05:22:53 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 05:22:53 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Feb 13 05:22:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Mon Feb 13 05:22:53 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.34"
[Mon Feb 13 07:15:28 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src28.ximg exists
[Mon Feb 13 07:15:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src28.csv
[Mon Feb 13 07:15:28 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Feb 13 07:15:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src28.csv
[Mon Feb 13 07:15:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 07:15:29 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Feb 13 07:15:29 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Feb 13 07:15:29 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Feb 13 10:17:12 2012] Spatial fit model total counts = 1790.990000, observed total counts = 1791.000000
[Mon Feb 13 10:17:12 2012] Offset between fit and detection position for source 32 = 0.168134 pixels
[Mon Feb 13 10:17:12 2012] 1853.797000 total counts/ 1487.630000 bgd. counts: snr = 9.493618
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.168134 pixels
  Position = (274.1, 291.4) = 17 28 30.74 -14 17 48.1
  Extent = 5.1 (4.5-5.9)", rotation angle = 0
  Source counts = 366.2 +/- 43.1
  Background counts = 1487.6
  Rate = 0.004 +/- 0.0005
[Mon Feb 13 10:17:12 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:12 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:12 2012] Source does appear to be extended
[Mon Feb 13 10:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 10:17:48 2012] XMMSAS src. selection expression = ellipse(23795.889180, 25306.943800, 308.513409, 308.513409, 0.000000, X, Y)
[Mon Feb 13 10:17:48 2012] Writing source region out to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src32_src.reg
[Mon Feb 13 10:17:48 2012] Extracting stamp from image fullrun_pn_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (256, 274) - (292, 309)
[Mon Feb 13 10:17:48 2012] XMMSAS bgd. selection expression = annulus(23795.889180, 25306.943800, 514.189015, 1028.378030, X, Y)
[Mon Feb 13 10:17:48 2012] Writing fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src32.gif
[Mon Feb 13 11:17:01 2012] Mean detx,y = (-3212.37, 1940.16) 
[Mon Feb 13 11:17:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 11:17:21 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 11:17:21 2012] Setting source spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Feb 13 11:17:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Feb 13 16:22:05 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:05 2012] Error reading totcts from fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Feb 13 16:22:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:06 2012] Using photon index=1.80, rate=0.00414, arf fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src32.arf
[Mon Feb 13 16:22:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:06 2012] Updating source flux to 1.5e-14
[Mon Feb 13 16:25:12 2012] Flag b found in src. 32 procflags, skipping spectral fitting