[Mon Feb 13 00:06:50 2012] Detection parameters:
  Position = (239.0, 362.0) = 17 28 41.24 -14 12 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.5 +/- 18.9
  Background counts = 143.9
  Rate = 0.002 +/- 0.0002

[Mon Feb 13 00:06:51 2012] Off-axis axis estimate = 6.31'
[Mon Feb 13 00:12:41 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 00:12:41 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Mon Feb 13 00:12:41 2012] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.616
[Mon Feb 13 00:12:41 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.58"
[Mon Feb 13 02:42:43 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Feb 13 02:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src17.csv
[Mon Feb 13 02:42:43 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Feb 13 02:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src17.csv
[Mon Feb 13 02:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 02:42:45 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Feb 13 02:42:45 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Feb 13 02:42:45 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Feb 13 05:22:33 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.245798 pixels away
[Mon Feb 13 05:22:33 2012] Spatial fit model total counts = 1487.000000, observed total counts = 1487.000000
[Mon Feb 13 05:22:33 2012] Offset between fit and detection position for source 19 = 0.599521 pixels
[Mon Feb 13 05:22:33 2012] Warning, changing simple spatial fit ID from 17 to 20
[Mon Feb 13 05:22:33 2012] 1325.065800 total counts/ 1232.220000 bgd. counts: snr = 2.644954
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.599521 pixels
  Position = (239.6, 362.0) = 17 28 41.06 -14 12 41.0
  Extent = 4.0 (3.1-5.2)", rotation angle = 0
  Source counts = 92.8 +/- 36.4
  Background counts = 1232.2
  Rate = 0.001 +/- 0.0004
[Mon Feb 13 05:22:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:33 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:22:33 2012] Source does appear to be extended
[Mon Feb 13 05:22:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 05:22:33 2012] Source is confused with source 22
[Mon Feb 13 05:22:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 05:22:53 2012] Initial guess for spatial extent in simple fitting = 4.00"
[Mon Feb 13 05:22:53 2012] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.497
[Mon Feb 13 05:22:53 2012] Skipping simple spatial due to low active detector fraction
[Mon Feb 13 10:17:12 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:12 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:12 2012] Source does appear to be extended
[Mon Feb 13 10:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 10:17:48 2012] XMMSAS src. selection expression = ellipse(20793.610600, 31449.288000, 239.746207, 239.746207, 0.000000, X, Y)
[Mon Feb 13 10:17:48 2012] Writing source region out to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src19_src.reg
[Mon Feb 13 10:17:48 2012] Extracting stamp from image fullrun_pn_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (226, 348) - (253, 376)
[Mon Feb 13 10:17:48 2012] XMMSAS bgd. selection expression = annulus(20793.610600, 31449.288000, 399.577011, 799.154023, X, Y) && !ellipse(20843.495000, 30750.918000, 489.482414, 298.108809, 89.641836, X, Y)
[Mon Feb 13 10:17:48 2012] Writing fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src19.gif
[Mon Feb 13 11:00:06 2012] Mean detx,y = (-5804.64, -4379.50) 
[Mon Feb 13 11:00:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 11:00:36 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 11:00:37 2012] Setting source spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Feb 13 11:00:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Feb 13 13:07:46 2012] Not generating rmf since there are only 92 counts
[Mon Feb 13 13:07:46 2012] rmf not generated due to insufficient counts
[Mon Feb 13 16:22:04 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:04 2012] Error reading totcts from fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Feb 13 16:22:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:06 2012] Using photon index=1.80, rate=0.00105, arf fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src19.arf
[Mon Feb 13 16:22:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:06 2012] Updating source flux to 5.6e-15
[Mon Feb 13 16:25:12 2012] Flag c found in src. 19 procflags, skipping spectral fitting
[Mon Feb 13 16:25:12 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting