[Mon Feb 13 00:06:49 2012] Detection parameters:
  Position = (310.8, 317.1) = 17 28 19.73 -14 15 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 312883.5 +/- 653.8
  Background counts = 194.2
  Rate = 4 +/- 0.008

[Mon Feb 13 00:06:51 2012] Off-axis axis estimate = 1.63'
[Mon Feb 13 00:12:41 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 00:12:41 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Feb 13 00:12:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Mon Feb 13 00:12:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Feb 13 02:42:43 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 02:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 02:42:43 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 02:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 02:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 02:42:45 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 02:42:45 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 02:42:45 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 05:22:33 2012] Spatial fit model total counts = 262331.000000, observed total counts = 275713.000000
[Mon Feb 13 05:22:33 2012] Offset between fit and detection position for source 1 = 0.186655 pixels
[Mon Feb 13 05:22:33 2012] 262096.000000 total counts/ 25600.000000 bgd. counts: snr = 1478.100000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186655 pixels
  Position = (310.7, 317.3) = 17 28 19.77 -14 15 55.7
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 236496.0 +/- 512.0
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Mon Feb 13 05:22:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:33 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:22:33 2012] Source does appear to be extended
[Mon Feb 13 05:22:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 05:22:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 05:22:53 2012] Initial guess for spatial extent in simple fitting = 6.50"
[Mon Feb 13 05:22:53 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.005
[Mon Feb 13 05:22:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.50"
[Mon Feb 13 07:15:28 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 07:15:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 07:15:28 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 07:15:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 07:15:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 07:15:29 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 07:15:29 2012] fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 07:15:29 2012] Fit fullrun_pn_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 10:17:11 2012] Spatial fit model total counts = 261753.000000, observed total counts = 274972.000000
[Mon Feb 13 10:17:11 2012] Offset between fit and detection position for source 1 = 0.010278 pixels
[Mon Feb 13 10:17:11 2012] 261862.000000 total counts/ 25600.000000 bgd. counts: snr = 1476.637500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010278 pixels
  Position = (310.7, 317.3) = 17 28 19.77 -14 15 55.7
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 236262.0 +/- 511.7
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Mon Feb 13 10:17:12 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:12 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:12 2012] Source does appear to be extended
[Mon Feb 13 10:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 10:17:47 2012] Counts = 236262.000000, rescaling region sizes by 3.000000
[Mon Feb 13 10:17:47 2012] XMMSAS src. selection expression = ellipse(26984.752000, 27556.276600, 1168.749034, 1168.749034, 0.000000, X, Y)
[Mon Feb 13 10:17:47 2012] Writing source region out to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 10:17:47 2012] Extracting stamp from image fullrun_pn_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (244, 250) - (378, 384)
[Mon Feb 13 10:17:47 2012] XMMSAS bgd. selection expression = annulus(26984.752000, 27556.276600, 5843.745168, 11687.490336, X, Y) && !ellipse(35228.144135, 28707.437317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17349.437042, 31457.662689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30788.069611, 35375.150452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38171.954000, 33183.613800, 450.466413, 450.466413, 0.000000, X, Y) && !ellipse(30946.368200, 26721.199800, 480.096014, 480.096014, 0.000000, X, Y) && !ellipse(30794.454956, 21273.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.402000, 39804.344000, 2228.168064, 2228.168064, 0.000000, X, Y) && !ellipse(16562.633713, 35559.491791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14750.747467, 33722.516846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20793.610600, 31449.288000, 319.661609, 319.661609, 0.000000, X, Y) && !ellipse(37205.676720, 31343.512620, 468.662413, 468.662413, 0.000000, X, Y) && !ellipse(39137.218109, 31340.185608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20843.495000, 30750.918000, 489.482414, 298.108809, 89.641836, X, Y) && !ellipse(30716.805969, 30577.443481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32894.768982, 29391.744568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.114899, 28967.314240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32157.063800, 28693.444000, 307.286409, 307.286409, 0.000000, X, Y) && !ellipse(38432.106049, 28595.084442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32761.612800, 27261.844000, 330.094409, 330.094409, 0.000000, X, Y) && !ellipse(38723.778497, 26399.659302, 685.525863, 358.343345, 261.675839, X, Y) && !ellipse(23795.889180, 25306.943800, 411.351212, 411.351212, 0.000000, X, Y) && !ellipse(27191.641020, 24567.574000, 1521.296044, 405.300012, 86.866130, X, Y) && !ellipse(27197.565200, 24808.010000, 927.560027, 927.560027, 0.000000, X, Y) && !ellipse(30741.744659, 24493.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19866.439340, 24385.390060, 448.304813, 448.304813, 0.000000, X, Y) && !ellipse(27207.844200, 24216.947200, 737.041621, 737.041621, 0.000000, X, Y) && !ellipse(25780.616180, 24204.548500, 464.552813, 464.552813, 0.000000, X, Y) && !ellipse(20084.220764, 23458.473602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.218690, 23448.900000, 588.058417, 588.058417, 0.000000, X, Y) && !ellipse(27266.951240, 23102.400800, 764.286422, 764.286422, 0.000000, X, Y) && !ellipse(27334.529633, 22051.341263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27438.175340, 20687.088000, 654.483219, 654.483219, 0.000000, X, Y) && !ellipse(27466.026800, 20340.674000, 865.240025, 865.240025, 0.000000, X, Y) && !ellipse(35798.784271, 19900.232544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.076600, 19840.010000, 501.143214, 501.143214, 0.000000, X, Y) && !ellipse(31372.091095, 18943.682571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.174000, 18854.407600, 793.652823, 793.652823, 0.000000, X, Y) && !ellipse(15052.673416, 18547.420776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27586.125519, 18307.848190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27619.090363, 17696.267502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.569366, 16655.675232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.668400, 15962.190620, 849.376024, 849.376024, 0.000000, X, Y) && !ellipse(27822.043457, 15085.087341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20684.587936, 39865.532471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.325653, 37556.326050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14472.562790, 36127.585754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19711.807770, 34899.005463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.192200, 32822.338220, 413.664812, 413.664812, 0.000000, X, Y) && !ellipse(27884.054321, 32818.237762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38059.693054, 32589.488403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34453.571198, 31344.746948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32370.142200, 31367.510000, 482.258414, 482.258414, 0.000000, X, Y) && !ellipse(28319.630463, 29871.099487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32197.373400, 29351.821400, 618.999218, 618.999218, 0.000000, X, Y) && !ellipse(28037.358000, 29485.074000, 1337.168038, 360.903210, 124.360000, X, Y) && !ellipse(16465.012750, 28466.882387, 1493.088043, 392.416740, 106.540802, X, Y) && !ellipse(35088.967340, 26304.378800, 1493.088043, 641.692818, 85.905586, X, Y) && !ellipse(17142.526200, 24539.296600, 720.895221, 720.895221, 0.000000, X, Y) && !ellipse(26354.696381, 24308.677704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16843.377838, 23756.442230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31194.377320, 22361.165800, 552.686416, 552.686416, 0.000000, X, Y) && !ellipse(37635.955688, 21534.449539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.721000, 21225.996000, 2736.288079, 1260.128036, 90.000000, X, Y) && !ellipse(25794.033844, 20174.203690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31882.187966, 20039.367600, 654.734419, 654.734419, 0.000000, X, Y) && !ellipse(25741.250400, 18272.408000, 560.310416, 560.310416, 0.000000, X, Y)
[Mon Feb 13 10:17:47 2012] Writing fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 10:19:14 2012] Mean detx,y = (118.08, -82.24) 
[Mon Feb 13 10:19:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 10:24:35 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 10:24:35 2012] Setting source spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 10:24:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 16:22:04 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:04 2012] Error reading totcts from fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 16:22:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:05 2012] Using photon index=1.80, rate=2.67, arf fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 16:22:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:05 2012] Updating source flux to 5.9e-12
[Mon Feb 13 16:32:07 2012] Reading fit data from xmm0501580101/analysis//spectral/fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 16:32:07 2012] Spectral fit parameter nH value = 2.32427e+21
[Mon Feb 13 16:32:07 2012] Spectral fit parameter PhoIndex value = 2.3465
[Mon Feb 13 16:32:07 2012] Failed to get F(0.3-8.0) from xmm0501580101/analysis//spectral/fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 16:32:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:32:07 2012] Using Nh = 2.3e+21, photon index=2.35, rate=2.67, arf fullrun_pn_xmm0501580101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 16:32:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:32:07 2012] Updating source flux to 6.7e-12