[Mon Feb 13 00:07:37 2012] Detection parameters:
  Position = (310.8, 317.1) = 17 28 19.74 -14 15 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110752.3 +/- 390.8
  Background counts = 62.1
  Rate = 1 +/- 0.004

[Mon Feb 13 00:07:37 2012] Off-axis axis estimate = 1.62'
[Mon Feb 13 03:19:54 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 03:19:54 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Feb 13 03:19:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Mon Feb 13 03:19:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Feb 13 05:22:14 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 05:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 05:22:14 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 05:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 05:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 05:22:15 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 05:22:15 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 05:22:15 2012] Fit fullrun_mos2_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 05:22:41 2012] Spatial fit model total counts = 96845.900000, observed total counts = 96894.000000
[Mon Feb 13 05:22:41 2012] Offset between fit and detection position for source 1 = 0.197268 pixels
[Mon Feb 13 05:22:41 2012] 96344.300000 total counts/ 18305.300000 bgd. counts: snr = 576.797368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197268 pixels
  Position = (310.6, 317.2) = 17 28 19.80 -14 15 56.0
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 78039.0 +/- 310.4
  Background counts = 18305.3
  Rate = 0.9 +/- 0.003
[Mon Feb 13 05:22:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:22:41 2012] Source does appear to be extended
[Mon Feb 13 05:22:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 07:28:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 07:28:03 2012] Initial guess for spatial extent in simple fitting = 5.53"
[Mon Feb 13 07:28:03 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.957
[Mon Feb 13 07:28:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.53"
[Mon Feb 13 10:16:49 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 10:16:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 10:16:49 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 10:16:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 10:16:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 10:16:50 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 10:16:50 2012] fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 10:16:50 2012] Fit fullrun_mos2_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 10:17:24 2012] Spatial fit model total counts = 101157.000000, observed total counts = 97320.000000
[Mon Feb 13 10:17:24 2012] Offset between fit and detection position for source 1 = 0.057275 pixels
[Mon Feb 13 10:17:24 2012] 100829.400000 total counts/ 25600.000000 bgd. counts: snr = 470.183750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057275 pixels
  Position = (310.6, 317.2) = 17 28 19.81 -14 15 55.9
  Extent = 5.4 (5.4-5.4)", rotation angle = 0
  Source counts = 75229.4 +/- 317.5
  Background counts = 25600.0
  Rate = 0.8 +/- 0.004
[Mon Feb 13 10:17:24 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:24 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:24 2012] Source does appear to be extended
[Mon Feb 13 10:17:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 10:17:24 2012] Source is confused with source 15
[Mon Feb 13 15:23:09 2012] Counts = 75229.400000, rescaling region sizes by 3.000000
[Mon Feb 13 15:23:09 2012] XMMSAS src. selection expression = ellipse(26973.275600, 27551.442200, 964.665028, 964.665028, 0.000000, X, Y)
[Mon Feb 13 15:23:09 2012] Writing source region out to fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 15:23:09 2012] Extracting stamp from image fullrun_mos2_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (255, 262) - (366, 373)
[Mon Feb 13 15:23:09 2012] XMMSAS bgd. selection expression = annulus(26973.275600, 27551.442200, 4823.325139, 9646.650278, X, Y) && !ellipse(35243.447723, 29108.567108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30769.805664, 35417.445068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31385.806976, 18931.201279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25221.022766, 19973.079910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.533081, 17537.581711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27296.116000, 26894.884000, 1164.768034, 591.943217, 291.686000, X, Y) && !ellipse(35796.928406, 19970.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27836.481506, 28230.081635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.922668, 27431.560333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.498199, 25286.532959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.116180, 23627.124600, 793.015223, 793.015223, 0.000000, X, Y) && !ellipse(27922.000000, 26299.647003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.436657, 37580.308317, 833.161749, 687.024946, 317.773801, X, Y) && !ellipse(27797.428680, 29009.372559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38447.350000, 39186.529800, 2231.880064, 2231.880064, 0.000000, X, Y) && !ellipse(25552.704000, 26494.684600, 1085.696031, 1085.696031, 0.000000, X, Y)
[Mon Feb 13 15:23:09 2012] Writing fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 15:23:23 2012] Mean detx,y = (48.43, -62.53) 
[Mon Feb 13 15:23:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 15:25:45 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 15:25:45 2012] Setting source spectrum file to fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 15:25:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 16:22:08 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:08 2012] Error reading totcts from fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 16:22:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:08 2012] Using photon index=1.80, rate=0.833, arf fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 16:22:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:08 2012] Updating source flux to 8.3e-12
[Mon Feb 13 16:23:16 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Feb 13 16:25:12 2012] Reading fit data from xmm0501580101/analysis//spectral/fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 16:25:12 2012] Spectral fit parameter nH value = 2.16057e+21
[Mon Feb 13 16:25:12 2012] Spectral fit parameter PhoIndex value = 2.27804
[Mon Feb 13 16:25:12 2012] Failed to get F(0.3-8.0) from xmm0501580101/analysis//spectral/fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 16:25:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:25:12 2012] Using Nh = 2.2e+21, photon index=2.28, rate=0.833, arf fullrun_mos2_xmm0501580101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 16:25:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:25:12 2012] Updating source flux to 8.1e-12