[Mon Feb 13 00:07:17 2012] Detection parameters:
  Position = (354.6, 407.2) = 17 28 6.66 -14 9 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 631.3 +/- 32.1
  Background counts = 49.8
  Rate = 0.01 +/- 0.0005

[Mon Feb 13 00:07:17 2012] Off-axis axis estimate = 8.88'
[Mon Feb 13 02:42:46 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 02:42:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 02:42:46 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Mon Feb 13 02:42:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Mon Feb 13 02:42:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.87"
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Feb 13 03:19:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src3.csv
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Feb 13 03:19:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src3.csv
[Mon Feb 13 03:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Feb 13 03:19:52 2012] Fit fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Feb 13 05:22:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.973371 pixels away
[Mon Feb 13 05:22:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:37 2012] Assessing source extent using major
[Mon Feb 13 05:22:37 2012] Source does appear to be extended
[Mon Feb 13 05:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 07:15:30 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 07:15:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 07:15:30 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Mon Feb 13 07:15:30 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Mon Feb 13 07:15:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.87"
[Mon Feb 13 07:28:02 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Feb 13 07:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src3.csv
[Mon Feb 13 07:28:02 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Feb 13 07:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src3.csv
[Mon Feb 13 07:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 07:28:03 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Feb 13 07:28:03 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Feb 13 07:28:03 2012] Fit fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Feb 13 10:17:17 2012] Spatial fit model total counts = 1017.000000, observed total counts = 1017.000000
[Mon Feb 13 10:17:17 2012] Offset between fit and detection position for source 4 = 0.247426 pixels
[Mon Feb 13 10:17:17 2012] 1012.225000 total counts/ 527.717000 bgd. counts: snr = 21.091157
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.247426 pixels
  Position = (354.3, 407.3) = 17 28 6.73 -14 9 24.0
  Extent = 6.4 (5.7-7.1)", rotation angle = 0
  Source counts = 484.5 +/- 31.8
  Background counts = 527.7
  Rate = 0.005 +/- 0.0004
[Mon Feb 13 10:17:17 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:17 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:17 2012] Source does appear to be extended
[Mon Feb 13 10:17:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 14:56:57 2012] XMMSAS src. selection expression = ellipse(30779.564200, 35389.464000, 382.804211, 382.804211, 0.000000, X, Y)
[Mon Feb 13 14:56:57 2012] Writing source region out to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src4_src.reg
[Mon Feb 13 14:56:57 2012] Extracting stamp from image fullrun_mos1_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (332, 385) - (376, 429)
[Mon Feb 13 14:56:57 2012] XMMSAS bgd. selection expression = annulus(30779.564200, 35389.464000, 638.007018, 1276.014037, X, Y)
[Mon Feb 13 14:56:57 2012] Writing fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src4.gif
[Mon Feb 13 15:01:43 2012] Mean detx,y = (7738.32, 4082.34) 
[Mon Feb 13 15:01:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 15:01:55 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 15:01:55 2012] Setting source spectrum file to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 13 15:01:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Feb 13 16:22:07 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:07 2012] Error reading totcts from fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 13 16:22:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:08 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src4.arf
[Mon Feb 13 16:22:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:08 2012] Updating source flux to 8.5e-14