[Mon Feb 13 00:07:16 2012] Detection parameters:
  Position = (155.2, 312.1) = 17 29 6.31 -14 16 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.2 +/- 24.6
  Background counts = 42.3
  Rate = 0.004 +/- 0.0003

[Mon Feb 13 00:07:17 2012] Off-axis axis estimate = 10.43'
[Mon Feb 13 02:42:46 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 02:42:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 02:42:46 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Mon Feb 13 02:42:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Mon Feb 13 02:42:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.64"
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Feb 13 03:19:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src4.csv
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Feb 13 03:19:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src4.csv
[Mon Feb 13 03:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Feb 13 03:19:52 2012] Fit fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Feb 13 05:22:37 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.380050 pixels away
[Mon Feb 13 05:22:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:37 2012] Assessing source extent using major
[Mon Feb 13 05:22:37 2012] Source does appear to be extended
[Mon Feb 13 05:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 07:15:30 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 07:15:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 07:15:30 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Mon Feb 13 07:15:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Mon Feb 13 07:15:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.64"
[Mon Feb 13 07:28:02 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Feb 13 07:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src4.csv
[Mon Feb 13 07:28:02 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Feb 13 07:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src4.csv
[Mon Feb 13 07:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 07:28:03 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Feb 13 07:28:03 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Feb 13 07:28:03 2012] Fit fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Feb 13 10:17:17 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.380050 pixels away
[Mon Feb 13 10:17:17 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 82.528010 pixels away
[Mon Feb 13 10:17:17 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:17 2012] Assessing source extent using major
[Mon Feb 13 10:17:17 2012] Source does appear to be extended
[Mon Feb 13 10:17:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 14:56:57 2012] XMMSAS src. selection expression = ellipse(13455.184769, 27106.483856, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 13 14:56:57 2012] Writing source region out to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src2_src.reg
[Mon Feb 13 14:56:57 2012] Extracting stamp from image fullrun_mos1_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (118, 275) - (193, 350)
[Mon Feb 13 14:56:57 2012] XMMSAS bgd. selection expression = annulus(13455.184769, 27106.483856, 1087.500000, 2175.000000, X, Y)
[Mon Feb 13 14:56:57 2012] Writing fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src2.gif
[Mon Feb 13 15:02:01 2012] Mean detx,y = (590.96, -13708.72) 
[Mon Feb 13 15:02:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 15:02:18 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 15:02:18 2012] Setting source spectrum file to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 15:02:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 13 15:15:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 13 15:15:09 2012] rmf not generated due to insufficient counts
[Mon Feb 13 16:22:07 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:07 2012] Error reading totcts from fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 13 16:22:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:08 2012] Using photon index=1.80, rate=0.00398, arf fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src2.arf
[Mon Feb 13 16:22:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:08 2012] Updating source flux to 1e-13
[Mon Feb 13 16:22:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting