[Mon Feb 13 00:07:16 2012] Detection parameters:
  Position = (310.8, 317.1) = 17 28 19.74 -14 15 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114186.1 +/- 404.9
  Background counts = 68.8
  Rate = 1 +/- 0.005

[Mon Feb 13 00:07:17 2012] Off-axis axis estimate = 1.62'
[Mon Feb 13 02:42:46 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 02:42:46 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Feb 13 02:42:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Mon Feb 13 02:42:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 03:19:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 03:19:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 03:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 03:19:52 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 03:19:52 2012] Fit fullrun_mos1_xmm0501580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 13 05:22:37 2012] Spatial fit model total counts = 97623.500000, observed total counts = 97598.000000
[Mon Feb 13 05:22:37 2012] Offset between fit and detection position for source 1 = 0.169511 pixels
[Mon Feb 13 05:22:37 2012] 97535.500000 total counts/ 20251.800000 bgd. counts: snr = 543.070349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.169511 pixels
  Position = (310.7, 317.2) = 17 28 19.79 -14 15 56.3
  Extent = 5.5 (5.5-5.5)", rotation angle = 0
  Source counts = 77283.7 +/- 312.3
  Background counts = 20251.8
  Rate = 0.9 +/- 0.003
[Mon Feb 13 05:22:37 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 05:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 05:22:37 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 05:22:37 2012] Source does appear to be extended
[Mon Feb 13 05:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 07:15:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 07:15:30 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Mon Feb 13 07:15:30 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.966
[Mon Feb 13 07:15:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Mon Feb 13 07:28:02 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 07:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 07:28:02 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 07:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src1.csv
[Mon Feb 13 07:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 07:28:03 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 07:28:03 2012] fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 07:28:03 2012] Fit fullrun_mos1_xmm0501580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 13 10:17:17 2012] Spatial fit model total counts = 97406.400000, observed total counts = 97403.000000
[Mon Feb 13 10:17:17 2012] Offset between fit and detection position for source 1 = 0.013576 pixels
[Mon Feb 13 10:17:17 2012] 97701.100000 total counts/ 20819.500000 bgd. counts: snr = 532.828278
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013576 pixels
  Position = (310.6, 317.2) = 17 28 19.80 -14 15 56.3
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 76881.6 +/- 312.6
  Background counts = 20819.5
  Rate = 0.9 +/- 0.003
[Mon Feb 13 10:17:17 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:17:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:17:17 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 10:17:17 2012] Source does appear to be extended
[Mon Feb 13 10:17:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 14:56:57 2012] Counts = 76881.600000, rescaling region sizes by 3.000000
[Mon Feb 13 14:56:57 2012] XMMSAS src. selection expression = ellipse(26977.852600, 27544.038000, 982.150228, 982.150228, 0.000000, X, Y)
[Mon Feb 13 14:56:57 2012] Writing source region out to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 14:56:57 2012] Extracting stamp from image fullrun_mos1_xmm0501580101_pi300-10000_cl_sm2.00.img.gz, (254, 261) - (367, 374)
[Mon Feb 13 14:56:57 2012] XMMSAS bgd. selection expression = annulus(26977.852600, 27544.038000, 4910.751141, 9821.502283, X, Y) && !ellipse(35244.353088, 29076.704102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30779.564200, 35389.464000, 510.405615, 510.405615, 0.000000, X, Y) && !ellipse(35821.484772, 19971.347504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25881.816400, 24233.986400, 1138.160033, 463.356013, 356.584998, X, Y) && !ellipse(20120.217000, 23633.795800, 1000.970466, 1000.970466, 0.000000, X, Y)
[Mon Feb 13 14:56:57 2012] Writing fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 14:57:10 2012] Mean detx,y = (152.82, -204.28) 
[Mon Feb 13 14:57:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 15:00:07 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 15:00:07 2012] Setting source spectrum file to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 15:00:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 16:22:07 2012] Updating aperture counts using extracted products
[Mon Feb 13 16:22:07 2012] Error reading totcts from fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 16:22:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:22:08 2012] Using photon index=1.80, rate=0.851, arf fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 16:22:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:22:08 2012] Updating source flux to 7.6e-12
[Mon Feb 13 16:23:16 2012] Reading fit data from xmm0501580101/analysis//spectral/fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 16:23:16 2012] Spectral fit parameter nH value = 2.10236e+21
[Mon Feb 13 16:23:16 2012] Spectral fit parameter PhoIndex value = 2.27609
[Mon Feb 13 16:23:16 2012] Failed to get F(0.3-8.0) from xmm0501580101/analysis//spectral/fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 16:23:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 16:23:16 2012] Using Nh = 2.1e+21, photon index=2.28, rate=0.851, arf fullrun_mos1_xmm0501580101_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 16:23:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 16:23:16 2012] Updating source flux to 7.4e-12