[Wed May  2 10:38:05 2012] Detection parameters:
  Position = (293.9, 275.3) = 14 30 30.36 -0 11 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.6 +/- 24.6
  Background counts = 18.7
  Rate = 0.02 +/- 0.001

[Wed May  2 10:38:06 2012] Off-axis axis estimate = 1.71'
[Wed May  2 12:03:29 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed May  2 12:03:29 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed May  2 12:03:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed May  2 12:03:29 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.28"
[Wed May  2 12:50:38 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  2 12:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_src2.csv
[Wed May  2 12:50:38 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  2 12:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_src2.csv
[Wed May  2 12:50:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 12:50:38 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  2 12:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  2 12:50:38 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  2 12:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  2 12:50:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501540201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  2 12:50:58 2012] Source 1 is offset by -5.751848 and -7.428728 pixels which is larger than
2 X fitted extent = 0.837246 x 0.837246, not incorporating fit results
[Wed May  2 12:50:58 2012] Vigneting correction estimate = 1.000000
[Wed May  2 12:50:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 12:50:58 2012] Assessing source extent using major
[Wed May  2 12:50:58 2012] Source does appear to be extended
[Wed May  2 12:50:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  2 14:16:09 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed May  2 14:16:09 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed May  2 14:16:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed May  2 14:16:09 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.28"
[Wed May  2 15:04:44 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  2 15:04:44 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  2 15:04:44 2012] Fit fullrun_mos2_xmm0501540201_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed May  2 15:04:44 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  2 15:04:44 2012] fullrun_mos2_xmm0501540201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  2 15:04:44 2012] Fit fullrun_mos2_xmm0501540201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May  2 15:05:05 2012] Spatial fit model total counts = 458.205000, observed total counts = 436.000000
[Wed May  2 15:05:05 2012] Offset between fit and detection position for source 1 = 0.239993 pixels
[Wed May  2 15:05:05 2012] 460.077000 total counts/ 211.312000 bgd. counts: snr = 17.113041
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.239993 pixels
  Position = (294.0, 275.5) = 14 30 30.35 -0 11 14.5
  Extent = 5.6 (4.8-6.5)" x 4.3 (3.7-4.9)", rotation angle = 353 (329-12) degrees
  Source counts = 248.8 +/- 21.4
  Background counts = 211.3
  Rate = 0.01 +/- 0.001
[Wed May  2 15:05:05 2012] Vigneting correction estimate = 1.000000
[Wed May  2 15:05:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  2 15:05:05 2012] Assessing source extent using major axis lower bound
[Wed May  2 15:05:05 2012] Source does appear to be extended
[Wed May  2 15:05:05 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Wed May  2 16:36:08 2012] XMMSAS src. selection expression = ellipse(25527.264400, 23920.657400, 336.750010, 255.053407, 353.078540, X, Y)
[Wed May  2 16:36:08 2012] Writing source region out to fullrun_mos2_xmm0501540201_pi300-10000_pass1_cl_src1_src.reg
[Wed May  2 16:36:08 2012] Extracting stamp from image fullrun_mos2_xmm0501540201_pi300-10000_cl_sm2.00.img.gz, (275, 256) - (313, 295)
[Wed May  2 16:36:08 2012] XMMSAS bgd. selection expression = annulus(25527.264400, 23920.657400, 561.250016, 1122.500032, X, Y)
[Wed May  2 16:36:08 2012] Writing fullrun_mos2_xmm0501540201_pi300-10000_pass1_cl_src1.gif
[Wed May  2 16:36:34 2012] Mean detx,y = (34.09, 41.61) 
[Wed May  2 16:36:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May  2 16:36:51 2012] Binned source spectrum to 10 counts/bin
[Wed May  2 16:36:52 2012] Setting source spectrum file to fullrun_mos2_xmm0501540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  2 16:36:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501540201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  2 17:03:35 2012] Updating aperture counts using extracted products
[Wed May  2 17:03:35 2012] Error reading totcts from fullrun_mos2_xmm0501540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  2 17:03:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  2 17:03:37 2012] Using photon index=1.80, rate=0.0137, arf fullrun_mos2_xmm0501540201_pi300-10000_pass1_cl_src1.arf
[Wed May  2 17:03:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  2 17:03:37 2012] Updating source flux to 1.7e-13
[Wed May  2 17:04:20 2012] Flag b found in src. 1 procflags, skipping spectral fitting