[Wed Dec 21 19:21:41 2011] Detection parameters:
  Position = (321.4, 303.0) = 0 37 9.59 61 21 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170285.0 +/- 482.1
  Background counts = 1262.2
  Rate = 1e+01 +/- 0.03

[Wed Dec 21 19:21:42 2011] Off-axis axis estimate = 1.70'
[Wed Dec 21 19:32:11 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 19:32:11 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Dec 21 19:32:11 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Wed Dec 21 19:32:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Dec 22 08:34:09 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 22 08:34:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 08:34:09 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 22 08:34:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_src1.csv
[Thu Dec 22 08:34:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 08:34:09 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 22 08:34:09 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 22 08:34:09 2011] Fit fullrun_pn_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 22 08:59:10 2011] Spatial fit model total counts = 151196.000000, observed total counts = 161213.000000
[Thu Dec 22 08:59:10 2011] Offset between fit and detection position for source 1 = 0.180283 pixels
[Thu Dec 22 08:59:10 2011] 150875.000000 total counts/ 25600.000000 bgd. counts: snr = 782.968750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180283 pixels
  Position = (321.3, 303.0) = 0 37 9.71 61 21 36.4
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 125275.0 +/- 388.4
  Background counts = 25600.0
  Rate = 5 +/- 0.02
[Thu Dec 22 08:59:10 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 08:59:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 08:59:10 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 08:59:10 2011] Source does appear to be extended
[Thu Dec 22 08:59:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 08:59:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 08:59:20 2011] Initial guess for spatial extent in simple fitting = 6.17"
[Thu Dec 22 08:59:20 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.086
[Thu Dec 22 08:59:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.17"
[Thu Dec 22 13:44:12 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 22 13:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_src1.csv
[Thu Dec 22 13:44:12 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 22 13:44:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_src1.csv
[Thu Dec 22 13:44:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 13:44:13 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 22 13:44:13 2011] fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 22 13:44:13 2011] Fit fullrun_pn_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec 22 14:50:48 2011] Spatial fit model total counts = 151200.000000, observed total counts = 161213.000000
[Thu Dec 22 14:50:48 2011] Offset between fit and detection position for source 1 = 0.000057 pixels
[Thu Dec 22 14:50:48 2011] 150879.000000 total counts/ 25600.000000 bgd. counts: snr = 782.993750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000057 pixels
  Position = (321.3, 303.0) = 0 37 9.71 61 21 36.4
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 125279.0 +/- 388.4
  Background counts = 25600.0
  Rate = 5 +/- 0.02
[Thu Dec 22 14:50:48 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 14:50:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 14:50:48 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 14:50:48 2011] Source does appear to be extended
[Thu Dec 22 14:50:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 14:50:59 2011] Counts = 125279.000000, rescaling region sizes by 3.000000
[Thu Dec 22 14:50:59 2011] XMMSAS src. selection expression = ellipse(27900.519400, 26309.235400, 1111.023733, 1111.023733, 0.000000, X, Y)
[Thu Dec 22 14:50:59 2011] Writing source region out to fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec 22 14:50:59 2011] Extracting stamp from image fullrun_pn_xmm0501450101_pi300-10000_cl_sm2.00.img.gz, (257, 239) - (385, 367)
[Thu Dec 22 14:50:59 2011] XMMSAS bgd. selection expression = annulus(27900.519400, 26309.235400, 5555.118666, 11110.237332, X, Y) && !ellipse(30009.898000, 24691.804000, 1297.080037, 1297.080037, 0.000000, X, Y) && !ellipse(26174.127000, 27130.054000, 1077.192031, 1077.192031, 0.000000, X, Y) && !ellipse(25877.908000, 26985.248000, 1302.416037, 632.623218, 314.009000, X, Y) && !ellipse(25686.902000, 26582.783200, 1077.192031, 1077.192031, 0.000000, X, Y) && !ellipse(27632.007080, 24848.426575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29172.354187, 24585.873383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.329000, 24261.185400, 521.769615, 521.769615, 0.000000, X, Y) && !ellipse(29609.273773, 24309.991943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29279.048000, 23910.336000, 1297.080037, 1297.080037, 0.000000, X, Y) && !ellipse(26821.084137, 27929.373016, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 22 14:50:59 2011] Writing fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1.gif
[Thu Dec 22 14:54:48 2011] Mean detx,y = (80.56, -178.36) 
[Thu Dec 22 14:54:59 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 14:58:35 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 14:58:36 2011] Setting source spectrum file to fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 22 14:58:36 2011] Setting bgd. spectrum file to fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 23 01:38:16 2011] Updating aperture counts using extracted products
[Fri Dec 23 01:38:16 2011] Error reading totcts from fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 01:38:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 01:38:17 2011] Using photon index=1.80, rate=5.44, arf fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 01:38:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 01:38:17 2011] Updating source flux to 1.3e-11
[Fri Dec 23 01:44:22 2011] Reading fit data from xmm0501450101/analysis//spectral/fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 23 01:44:22 2011] Spectral fit parameter nH value = 7.45961e+21
[Fri Dec 23 01:44:22 2011] Spectral fit parameter PhoIndex value = 1.04522
[Fri Dec 23 01:44:22 2011] Failed to get F(0.3-8.0) from xmm0501450101/analysis//spectral/fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 23 01:44:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 01:44:22 2011] Using Nh = 7.5e+21, photon index=1.05, rate=5.44, arf fullrun_pn_xmm0501450101_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 01:44:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 01:44:22 2011] Updating source flux to 3.5e-11