[Wed Dec 21 19:22:27 2011] Detection parameters:
  Position = (328.4, 294.1) = 0 37 5.41 61 20 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.8 +/- 23.0
  Background counts = 142.0
  Rate = 0.008 +/- 0.001

[Wed Dec 21 19:22:27 2011] Off-axis axis estimate = 2.19'
[Thu Dec 22 08:40:10 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 08:40:10 2011] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Dec 22 08:40:10 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.704
[Thu Dec 22 08:40:10 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.52"
[Thu Dec 22 08:59:04 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Dec 22 08:59:04 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Dec 22 08:59:04 2011] Fit fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Dec 22 08:59:04 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Dec 22 08:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Dec 22 08:59:04 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Dec 22 08:59:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Dec 22 08:59:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501450101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 08:59:13 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.599585 pixels away
[Thu Dec 22 08:59:13 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 08:59:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 08:59:13 2011] Assessing source extent using major
[Thu Dec 22 08:59:13 2011] Source does appear to be extended
[Thu Dec 22 08:59:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 13:47:08 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 13:47:08 2011] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Dec 22 13:47:08 2011] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.704
[Thu Dec 22 13:47:08 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.52"
[Thu Dec 22 14:50:42 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Dec 22 14:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_src2.csv
[Thu Dec 22 14:50:42 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Dec 22 14:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_src2.csv
[Thu Dec 22 14:50:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 14:50:42 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Dec 22 14:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Dec 22 14:50:42 2011] fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Dec 22 14:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Dec 22 14:50:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501450101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 14:50:48 2011] Warning, spatial fit 8 centroid is now closest to src. 8
[Thu Dec 22 14:50:48 2011] Warning, spatial fit 10 centroid is now closest to src. 7
[Thu Dec 22 14:50:51 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.608446 pixels away
[Thu Dec 22 14:50:51 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 14:50:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 14:50:51 2011] Assessing source extent using major
[Thu Dec 22 14:50:51 2011] Source does appear to be extended
[Thu Dec 22 14:50:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 01:21:13 2011] XMMSAS src. selection expression = ellipse(28519.036438, 25533.907349, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 01:21:13 2011] Writing source region out to fullrun_mos2_xmm0501450101_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 23 01:21:13 2011] Extracting stamp from image fullrun_mos2_xmm0501450101_pi300-10000_cl_sm2.00.img.gz, (291, 257) - (366, 332)
[Fri Dec 23 01:21:13 2011] XMMSAS bgd. selection expression = annulus(28519.036438, 25533.907349, 1087.500000, 2175.000000, X, Y) && !ellipse(27893.090140, 26299.731620, 1400.102440, 1265.575236, 51.602500, X, Y)
[Fri Dec 23 01:21:13 2011] Writing fullrun_mos2_xmm0501450101_pi300-10000_pass1_cl_src3.gif
[Fri Dec 23 01:29:22 2011] Mean detx,y = (-590.69, -80.25) 
[Fri Dec 23 01:29:24 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 01:29:49 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 01:29:50 2011] Setting source spectrum file to fullrun_mos2_xmm0501450101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 01:29:50 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501450101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 23 01:36:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 23 01:36:57 2011] rmf not generated due to insufficient counts
[Fri Dec 23 01:38:18 2011] Updating aperture counts using extracted products
[Fri Dec 23 01:38:18 2011] Error reading totcts from fullrun_mos2_xmm0501450101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 01:38:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 01:38:18 2011] Using photon index=1.80, rate=0.00818, arf fullrun_mos2_xmm0501450101_pi300-10000_pass1_cl_src3.arf
[Fri Dec 23 01:38:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 01:38:18 2011] Updating source flux to 8.7e-14
[Fri Dec 23 01:39:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting