[Mon Feb 13 10:45:46 2012] Detection parameters:
  Position = (325.0, 299.2) = 2 55 47.74 19 29 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.0 +/- 21.2
  Background counts = 119.6
  Rate = 0.005 +/- 0.0006

[Mon Feb 13 10:45:46 2012] Off-axis axis estimate = 1.93'
[Mon Feb 13 11:01:47 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 11:01:47 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Feb 13 11:01:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Mon Feb 13 11:01:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.39"
[Mon Feb 13 11:07:55 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Feb 13 11:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_src3.csv
[Mon Feb 13 11:07:55 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Feb 13 11:07:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_src3.csv
[Mon Feb 13 11:07:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 11:07:55 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Feb 13 11:07:55 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Feb 13 11:07:55 2012] Fit fullrun_mos2_xmm0501370101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Feb 13 11:08:00 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.208195 pixels away
[Mon Feb 13 11:08:00 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 11:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 11:08:00 2012] Assessing source extent using major
[Mon Feb 13 11:08:00 2012] Source does appear to be extended
[Mon Feb 13 11:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 11:20:55 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 11:20:55 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Feb 13 11:20:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Mon Feb 13 11:20:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.39"
[Mon Feb 13 11:41:44 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Feb 13 11:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_src3.csv
[Mon Feb 13 11:41:44 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Feb 13 11:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_src3.csv
[Mon Feb 13 11:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 11:41:44 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Feb 13 11:41:44 2012] fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Feb 13 11:41:44 2012] Fit fullrun_mos2_xmm0501370101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Feb 13 11:41:50 2012] Spatial fit model total counts = 190.996000, observed total counts = 191.000000
[Mon Feb 13 11:41:50 2012] Offset between fit and detection position for source 4 = 0.241870 pixels
[Mon Feb 13 11:41:50 2012] 195.104700 total counts/ 141.457000 bgd. counts: snr = 4.510647
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.241870 pixels
  Position = (324.9, 299.0) = 2 55 47.79 19 29 11.0
  Extent = 4.2 (2.3-5.4)", rotation angle = 0
  Source counts = 53.6 +/- 14.0
  Background counts = 141.5
  Rate = 0.003 +/- 0.0008
[Mon Feb 13 11:41:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 11:41:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 11:41:50 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 11:41:50 2012] Source does appear to be extended
[Mon Feb 13 11:41:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 11:57:46 2012] XMMSAS src. selection expression = ellipse(28214.876420, 25962.626000, 249.609007, 249.609007, 0.000000, X, Y)
[Mon Feb 13 11:57:46 2012] Writing source region out to fullrun_mos2_xmm0501370101_pi300-10000_pass1_cl_src4_src.reg
[Mon Feb 13 11:57:46 2012] Extracting stamp from image fullrun_mos2_xmm0501370101_pi300-10000_cl_sm2.00.img.gz, (311, 285) - (339, 313)
[Mon Feb 13 11:57:46 2012] XMMSAS bgd. selection expression = annulus(28214.876420, 25962.626000, 416.015012, 832.030024, X, Y)
[Mon Feb 13 11:57:46 2012] Writing fullrun_mos2_xmm0501370101_pi300-10000_pass1_cl_src4.gif
[Mon Feb 13 11:59:00 2012] Mean detx,y = (-996.81, -886.59) 
[Mon Feb 13 11:59:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 11:59:08 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 11:59:08 2012] Setting source spectrum file to fullrun_mos2_xmm0501370101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 13 11:59:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501370101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Feb 13 12:07:34 2012] Not generating rmf since there are only 53 counts
[Mon Feb 13 12:07:34 2012] rmf not generated due to insufficient counts
[Mon Feb 13 12:12:43 2012] Updating aperture counts using extracted products
[Mon Feb 13 12:12:43 2012] Error reading totcts from fullrun_mos2_xmm0501370101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 13 12:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 12:12:43 2012] Using photon index=1.80, rate=0.00324, arf fullrun_mos2_xmm0501370101_pi300-10000_pass1_cl_src4.arf
[Mon Feb 13 12:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 12:12:43 2012] Updating source flux to 3.9e-14
[Mon Feb 13 12:13:18 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting