[Sat May 18 13:06:07 2013] Detection parameters:
  Position = (285.4, 278.9) = 7 25 51.21 -7 44 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.1 +/- 14.2
  Background counts = 22.0
  Rate = 0.003 +/- 0.0004

[Sat May 18 13:06:08 2013] Off-axis axis estimate = 1.70'
[Sat May 18 14:08:10 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat May 18 14:08:10 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat May 18 14:08:10 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sat May 18 14:08:10 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.28"
[Sat May 18 14:41:18 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_src8.ximg exists
[Sat May 18 14:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_src8.csv
[Sat May 18 14:41:18 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat May 18 14:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_src8.csv
[Sat May 18 14:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 14:41:19 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat May 18 14:41:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat May 18 14:41:19 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat May 18 14:41:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat May 18 14:41:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 14:41:30 2013] Source 14 is offset by 7.101054 and -6.812541 pixels which is larger than
2 X fitted extent = 0.836828 x 0.836828, not incorporating fit results
[Sat May 18 14:41:30 2013] Vigneting correction estimate = 1.000000
[Sat May 18 14:41:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 14:41:30 2013] Assessing source extent using major
[Sat May 18 14:41:30 2013] Source does appear to be extended
[Sat May 18 14:41:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 15:48:11 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:48:11 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat May 18 15:48:11 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sat May 18 15:48:11 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.28"
[Sat May 18 16:22:01 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass1_src8.ximg exists
[Sat May 18 16:22:01 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat May 18 16:22:01 2013] Fit fullrun_mos2_xmm0501350101_pi300-10000_cl_pass1_src8 appears to have run properly
[Sat May 18 16:22:01 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat May 18 16:22:01 2013] fullrun_mos2_xmm0501350101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat May 18 16:22:01 2013] Fit fullrun_mos2_xmm0501350101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat May 18 16:22:12 2013] Spatial fit model total counts = 289.337000, observed total counts = 264.000000
[Sat May 18 16:22:12 2013] Offset between fit and detection position for source 14 = 0.063750 pixels
[Sat May 18 16:22:12 2013] 290.196700 total counts/ 214.485000 bgd. counts: snr = 5.169690
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.063750 pixels
  Position = (285.4, 278.8) = 7 25 51.22 -7 44 8.4
  Extent = 5.7 (4.3-7.2)", rotation angle = 0
  Source counts = 75.7 +/- 17.0
  Background counts = 214.5
  Rate = 0.002 +/- 0.0005
[Sat May 18 16:22:12 2013] Vigneting correction estimate = 1.000000
[Sat May 18 16:22:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 16:22:12 2013] Assessing source extent using major axis lower bound
[Sat May 18 16:22:12 2013] Source does appear to be extended
[Sat May 18 16:22:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 17:19:22 2013] XMMSAS src. selection expression = ellipse(24780.325600, 24208.911080, 343.731119, 343.731119, 0.000000, X, Y)
[Sat May 18 17:19:22 2013] Writing source region out to fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14_src.reg
[Sat May 18 17:19:22 2013] Extracting stamp from image fullrun_mos2_xmm0501350101_pi300-10000_cl_sm2.00.img.gz, (266, 259) - (305, 299)
[Sat May 18 17:19:22 2013] XMMSAS bgd. selection expression = annulus(24780.325600, 24208.911080, 572.885199, 1145.770398, X, Y)
[Sat May 18 17:19:22 2013] Writing fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14.gif
[Sat May 18 17:21:28 2013] Mean detx,y = (105.84, 112.70) 
[Sat May 18 17:21:30 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 17:21:40 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 17:21:41 2013] Setting source spectrum file to fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat May 18 17:21:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat May 18 17:26:21 2013] Not generating rmf since there are only 75 counts
[Sat May 18 17:26:21 2013] rmf not generated due to insufficient counts
[Sat May 18 17:32:57 2013] Updating aperture counts using extracted products
[Sat May 18 17:32:57 2013] Total counts from fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 118.00
[Sat May 18 17:32:57 2013] Total counts from fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 292.00
[Sat May 18 17:32:57 2013] Got source and background scale factors 371200.000000, 2819852.000000
[Sat May 18 17:32:57 2013] User source parameters:
  Position = (285.4, 278.8) = 7 25 51.22 -7 44 8.4
  Extent = 5.7 (4.3-7.2)", rotation angle = 0
  Source aperture counts = 79.6 +/- 11.9
  Background aperture counts = 38.4
  Rate = 0.002 +/- 0.0003

[Sat May 18 17:33:05 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 17:33:05 2013] Using photon index=1.80, rate=0.00212, arf fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14.arf
[Sat May 18 17:33:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 17:33:05 2013] Updating source flux to 3.5e-14
[Sat May 18 17:33:12 2013] Flag b found in src. 14 procflags, skipping spectral fitting
[Sat May 18 17:33:12 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 17:33:14 2013] xmm0501350101/analysis//spectral/fullrun_mos2_xmm0501350101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete