[Sat May 18 13:05:46 2013] Detection parameters:
  Position = (196.5, 251.5) = 7 26 17.23 -7 46 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.0 +/- 11.3
  Background counts = 24.2
  Rate = 0.003 +/- 0.0004

[Sat May 18 13:05:46 2013] Off-axis axis estimate = 8.13'
[Sat May 18 13:39:26 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sat May 18 13:39:26 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sat May 18 13:39:26 2013] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.589
[Sat May 18 13:39:26 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.50"
[Sat May 18 14:08:10 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 18 14:08:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_src11.csv
[Sat May 18 14:08:10 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 18 14:08:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_src11.csv
[Sat May 18 14:08:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 14:08:10 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 18 14:08:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat May 18 14:08:10 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 18 14:08:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat May 18 14:08:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501350101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 14:41:26 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.346213 pixels away
[Sat May 18 14:41:26 2013] Vigneting correction estimate = 1.000000
[Sat May 18 14:41:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 14:41:26 2013] Assessing source extent using major
[Sat May 18 14:41:26 2013] Source does appear to be extended
[Sat May 18 14:41:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 15:21:18 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sat May 18 15:21:18 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Sat May 18 15:21:18 2013] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.589
[Sat May 18 15:21:18 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.50"
[Sat May 18 15:48:11 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 18 15:48:11 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 18 15:48:11 2013] Fit fullrun_mos1_xmm0501350101_pi300-10000_cl_pass1_src11 appears to have run properly
[Sat May 18 15:48:11 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 18 15:48:11 2013] fullrun_mos1_xmm0501350101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 18 15:48:11 2013] Fit fullrun_mos1_xmm0501350101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat May 18 16:22:09 2013] Spatial fit model total counts = 291.565000, observed total counts = 270.000000
[Sat May 18 16:22:09 2013] Offset between fit and detection position for source 13 = 0.084587 pixels
[Sat May 18 16:22:09 2013] 290.274500 total counts/ 253.442000 bgd. counts: snr = 2.313619
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.084587 pixels
  Position = (196.6, 251.5) = 7 26 17.21 -7 46 7.1
  Extent = 3.7 (2.7-5.4)", rotation angle = 0
  Source counts = 36.8 +/- 17.0
  Background counts = 253.4
  Rate = 0.001 +/- 0.0005
[Sat May 18 16:22:09 2013] Vigneting correction estimate = 1.000000
[Sat May 18 16:22:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 16:22:09 2013] Assessing source extent using major axis lower bound
[Sat May 18 16:22:09 2013] Source does appear to be extended
[Sat May 18 16:22:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 16:57:25 2013] XMMSAS src. selection expression = ellipse(17055.022000, 21834.994600, 221.310006, 221.310006, 0.000000, X, Y)
[Sat May 18 16:57:25 2013] Writing source region out to fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13_src.reg
[Sat May 18 16:57:25 2013] Extracting stamp from image fullrun_mos1_xmm0501350101_pi300-10000_cl_sm2.00.img.gz, (184, 239) - (209, 264)
[Sat May 18 16:57:25 2013] XMMSAS bgd. selection expression = annulus(17055.022000, 21834.994600, 368.850011, 737.700021, X, Y)
[Sat May 18 16:57:25 2013] Writing fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13.gif
[Sat May 18 17:00:42 2013] Mean detx,y = (2870.03, 7405.42) 
[Sat May 18 17:00:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 17:00:50 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 17:00:50 2013] Setting source spectrum file to fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May 18 17:00:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat May 18 17:11:34 2013] Not generating rmf since there are only 36 counts
[Sat May 18 17:11:34 2013] rmf not generated due to insufficient counts
[Sat May 18 17:32:50 2013] Updating aperture counts using extracted products
[Sat May 18 17:32:50 2013] Total counts from fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 59.00
[Sat May 18 17:32:50 2013] Total counts from fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 150.00
[Sat May 18 17:32:50 2013] Got source and background scale factors 153600.000000, 1182676.000000
[Sat May 18 17:32:50 2013] User source parameters:
  Position = (196.6, 251.5) = 7 26 17.21 -7 46 7.1
  Extent = 3.7 (2.7-5.4)", rotation angle = 0
  Source aperture counts = 39.5 +/- 8.7
  Background aperture counts = 19.5
  Rate = 0.001 +/- 0.0002

[Sat May 18 17:32:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 17:32:54 2013] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13.arf
[Sat May 18 17:32:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 17:32:54 2013] Updating source flux to 2.7e-14
[Sat May 18 17:33:07 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 17:33:12 2013] xmm0501350101/analysis//spectral/fullrun_mos1_xmm0501350101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete