[Thu May 31 06:46:17 2012] Detection parameters:
  Position = (405.1, 318.0) = 1 22 20.70 33 31 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 359.6 +/- 28.2
  Background counts = 150.8
  Rate = 0.007 +/- 0.0005

[Thu May 31 06:46:18 2012] Off-axis axis estimate = 7.86'
[Thu May 31 06:50:15 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu May 31 06:50:15 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu May 31 06:50:15 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.023
[Thu May 31 06:50:15 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.36"
[Thu May 31 08:12:25 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_src23.ximg exists
[Thu May 31 08:12:25 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May 31 08:12:25 2012] Fit fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_src23 appears to have run properly
[Thu May 31 08:12:25 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May 31 08:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 31 08:12:25 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May 31 08:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May 31 08:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501280101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 09:43:40 2012] Warning, spatial fit 23 centroid is now closest to src. 21
[Thu May 31 09:43:40 2012] Vigneting correction estimate = 1.000000
[Thu May 31 09:43:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 09:43:40 2012] Assessing source extent using major
[Thu May 31 09:43:40 2012] Source does appear to be extended
[Thu May 31 09:43:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 09:44:01 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:44:01 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu May 31 09:44:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.023
[Thu May 31 09:44:01 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.36"
[Thu May 31 11:24:49 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_src20.ximg exists
[Thu May 31 11:24:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_src20.csv
[Thu May 31 11:24:49 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May 31 11:24:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_src20.csv
[Thu May 31 11:24:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 11:24:50 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May 31 11:24:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu May 31 11:24:50 2012] fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 31 11:24:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu May 31 11:24:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501280101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:35:25 2012] Spatial fit model total counts = 942.597000, observed total counts = 813.000000
[Thu May 31 13:35:25 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 13:35:25 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:35:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:35:25 2012] Assessing source extent using major
[Thu May 31 13:35:25 2012] Source does appear to be extended
[Thu May 31 13:35:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:35:46 2012] XMMSAS src. selection expression = ellipse(35199.055634, 27614.332550, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 13:35:46 2012] Writing source region out to fullrun_pn_xmm0501280101_pi300-10000_pass1_cl_src23_src.reg
[Thu May 31 13:35:46 2012] Extracting stamp from image fullrun_pn_xmm0501280101_pi300-10000_cl_sm2.00.img.gz, (368, 280) - (443, 355)
[Thu May 31 13:35:46 2012] XMMSAS bgd. selection expression = annulus(35199.055634, 27614.332550, 1087.500000, 2175.000000, X, Y) && !ellipse(33008.221039, 28670.365143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36828.662170, 27858.266022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38173.538055, 26748.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36417.958344, 24983.878204, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 13:35:46 2012] Writing fullrun_pn_xmm0501280101_pi300-10000_pass1_cl_src23.gif
[Thu May 31 14:03:21 2012] Mean detx,y = (-8109.42, 7804.16) 
[Thu May 31 14:03:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 14:03:53 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 14:03:54 2012] Setting source spectrum file to fullrun_pn_xmm0501280101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu May 31 14:03:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501280101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu May 31 14:40:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 14:40:09 2012] rmf not generated due to insufficient counts
[Thu May 31 17:35:32 2012] Updating aperture counts using extracted products
[Thu May 31 17:35:32 2012] Error reading totcts from fullrun_pn_xmm0501280101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu May 31 17:35:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 17:35:36 2012] Using photon index=1.80, rate=0.0069, arf fullrun_pn_xmm0501280101_pi300-10000_pass1_cl_src23.arf
[Thu May 31 17:35:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 17:35:36 2012] Updating source flux to 3.8e-14
[Thu May 31 17:47:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting