[Sun May 20 09:28:48 2012] Detection parameters:
  Position = (278.8, 182.2) = 0 55 35.58 46 3 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.9 +/- 6.8
  Background counts = 7.1
  Rate = 0.003 +/- 0.0008

[Sun May 20 09:28:48 2012] Off-axis axis estimate = 8.55'
[Sun May 20 11:29:52 2012] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Sun May 20 11:29:52 2012] Initial guess for spatial extent in simple fitting = 10.70"
[Sun May 20 11:29:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.998
[Sun May 20 11:29:52 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.70"
[Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src17.csv
[Sun May 20 12:16:26 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 20 12:16:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src17.csv
[Sun May 20 12:16:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 12:16:27 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 20 12:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun May 20 12:16:27 2012] fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 20 12:16:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun May 20 12:16:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501230301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 12:16:47 2012] Spatial fit model total counts = 94.264900, observed total counts = 84.000000
[Sun May 20 12:16:47 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 20 12:16:47 2012] Vigneting correction estimate = 1.000000
[Sun May 20 12:16:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 12:16:47 2012] Assessing source extent using major
[Sun May 20 12:16:47 2012] Source does appear to be extended
[Sun May 20 12:16:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 12:16:47 2012] Deleting source due to low Poisson probability 0.9